Presentation and programming of the MARANTEC D323-868 3-channel transmitter

This transmitter is innovative, as it allows you to recharge and control automation and motorization systems of all kinds from your car. The MARANTEC D323-868 transmitter does not require batteries, as it charges via your cigarette lighter or by plugging it into your car (12V max). You can replace your old MARANTEC remote with this transmitter, provided they operate at the frequency of 868 MHz.

The programming system remains the same as that of other MARENTEC remotes: self-learning. You will thus have the possibility to program this transmitter using an old remote, with the help of the pin provided with your order.

To program your cigarette lighter transmitter, it’s very simple: take your old transmitter and follow the step-by-step instructions below:

• 1^st step: Using the provided pin, connect your old remote to the MARANTEC D323-868 remote
• 2^nd step: Press one of the buttons on your old remote: hold it down until the LED on your old remote lights up
• 3^rd step: While holding down the button, press one of the buttons on your new MARANTEC D323-868 remote and hold it down until the LED lights up.
• 4^th step: Then release the buttons
• 5^th step: If you want to program multiple buttons, repeat this procedure for each button you wish to program
• 6^th step: Wait about 10 seconds
• 7^th step: Your MARANTEC D323-868 transmitter is programmed and ready to use

If you want to program your MARANTEC D323-868 transmitter from your receiver, without using the remote, it is possible. However, this method is only recommended if you no longer have any functioning remotes, as it will erase all previously registered remotes. We have listed the programming steps below:

• 1^st step: Press the P button and hold it down until the 2 LED blinks
• 2^nd step: Press the P button repeatedly until the 7 LED blinks
• 3^rd step: Press one of the buttons on your MARANTEC D323-868 remote until the 7 LED blinks faster
• 4^th step: Press and then release the P button: then wait about 10 seconds
• 5^th step: Your MARANTEC D323-868 transmitter is programmed and ready to use

Features and attributes of the MARANTEC D323-868 transmitter

The MARANTEC D323-868 transmitter operates at a frequency of 868 MHz and does not require a battery for its power supply: you can plug it into your cigarette lighter to recharge it. It can be controlled from your car, even while plugged in. Thus, you can keep it in your cigarette lighter to control your motorizations and in this way, you will avoid losing it. Thanks to this system, the MARANTEC D323-868 transmitter is part of the range of practical and functional transmitters, due to its ease of use.

In terms of design, this transmitter stands out from others: its round shape provides optimal comfort for its users, and its gray colors offer unmatched sobriety. Weighing 18g, it is a pleasant and compact transmitter. It offers its users interesting dimensions: a diameter of 37mm and a length of 64mm.

Equipped with the Rolling code system, this remote is a guarantee of security. You will have the possibility to code up to 281 trillion codes.

This transmitter can be controlled at temperatures ranging from -20°C to +60°C. Thanks to its IP54 protection rating, your transmitter will be protected from water splashes and dust projections.

Enjoy free shipping when purchasing two remotes!

Thanks to Alloremotecontrol.com, you can benefit from free shipping if you decide to purchase at least two remotes. Buying two remotes may be necessary in case of a malfunction or failure of one of them. This way, you will have a spare on hand.

For any additional information, visit our T&Cs or contact us. We are available for you 5 days a week.