Presentation of the CARDIN SAFEKIT8 Kit This CARDIN SAFEKIT8 Kit is composed of a mobile transmitter interface for your safety edge as well as a fixed transmission unit. With this, you will be able to have all the information necessary to communicate between your safety edges. With their permanent information transmission, you can, for example, avoid possible injuries due to entrapment. In addition, this system is functional with radio waves so you will avoid the use of cables. For your moving gate This product can be powered by 12 V or 24 V (AC-DC) and is configured with a frequency of 868 MHz. The usefulness of this product no longer needs to be demonstrated. In fact, the radio transmission between the mobile unit provided in this kit with the fixed unit allows you to eliminate wired connections between one or multiple safety edges and the programmer that completes it. This allows your sensitive safety edge (e.g. safety edge) to be applied to a moving gate. The maximum signal range of this device is 30 m. Additionally, this product has 8 manageable safeties. A resistant kit Also, for your safety and to ensure maximum reliability, the two devices in this kit are placed in a shockproof plastic case, classified with the IP65 protection index. That is to say that this product is completely protected against dust, but also against water splashes from all directions with a hose. The transmission of information between the mobile and fixed unit is instantaneous. Indeed, thanks to LEDS, you will be able to understand the status of the safety devices, but also the battery charge level of the mobile unit. Composition of the CARDIN SAFEKIT8 Among the products included inside this CARDIN SAFEKIT8, you have the following items: The CARDIN SAFEPRC8 interface The CARDIN SAFEDECX8 transmission unit Installation of the CARDIN SAFEKIT8 Kit To install the CARDIN SAFEPRC8 interface: Note: Determine the surface mounting location based on installation requirements. In the example illustrated in Figure 1, the transceiver interface is installed at the end of a sliding gate. First, using a torx screwdriver, unscrew the four retaining screws and remove the cover. Afterwards, using the box, drill the holes at the end of the gate ‘A’ and attach the transceiver interface to the gate with the two 4.2×45 self-tapping screws provided. Next, pass the cable coming from the mechanical safety edge ‘B’ through the cable gland. Finally, plug in the battery pack cable. Then put the cover back in place using the four fixing screws. Installing the CARDIN SAFEDECX8 fixed unit First, using a torx screwdriver, unscrew the four fixing screws and remove the cover. Then, unscrew and extract the electronic card and, with the same screwdriver, uncapped the holes. Next, trace the two fixing points using the box and then drill the holes. Secure the box using the two wall plugs and the 4.2 x 45 self-tapping screws provided. Finally, plug in the electronic card and make the electrical connection. Then, replace the cover in its place using the four fixing screws that were removed previously. For more information on the installation of your kit, we invite you to consult the interface and transmission unit instructions here. Also, the kit instructions are also present when you open this product. CARDIN SAFEKIT8 FAQ Can you tell me more about the CARDIN brand? To begin with, in the world of home automation, the Italian brand CARDIN has made its way since the year of its creation in 1974. In the DNA of this brand, there is a real desire to offer you simple, ergonomic systems. and reliable for automation and access control. This by making a relevant choice in the materials selected for each of their products. Finally, striving for excellence for them is part of normality. Moreover, many of their products, whether remote controls, receivers or batteries, are used every day around the world by various consumers. Where can I find other CARDIN brand products? You can find other CARDIN brand products on Allo Remote Control by clicking on the link here Why buy this product on Allo Remote Control? First, know that your satisfaction is the priority. We will handle your product with great care. Then, your order is shipped the same day. Then the 1 year warranty is offered (possible extension up to 2 years – see CGV) Finally, telephone assistance (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) available 5 days a week