Presentation and Operating Principle of the PROEM RR2C4A39P Receiver

The PROEM RR2C4A39P receiver was designed and manufactured by PRO EM. Aiming for customer satisfaction, the PRO EM brand has focused on quality production as well as secure products. All products from the PRO EM brand are certified to European standards and directives, as well as to the EN 60065 standard.

Thanks to an internal system integrated into your receiver, you can easily maintain synchronization between your transmitter and your receiver. This receiver is intended for one type of wave: short waves. This means that its conversion is done simply by changing the frequency. This receiver is an ideal product if you want to ensure optimal security for your motorization systems such as your gates, garage doors, anti-theft devices, lighting, or sliding doors: it is adaptable to almost all motorization systems.

The security system included in your PROEM RR2C4A39P receiver is the Rolling code: the rolling code offers you additional security, as the code emitted from the transmitter to the receiver is a unique and uncloneable code. It is therefore difficult for hackers to copy this code to open your motorizations: this reduces the risk of hacking your systems by 90%. The Rolling code system of the PROEM RR2C4A39P receiver contains AM/ASK type modulation.

Compatibility of this Receiver

The PROEM RR2C4A39P receiver from the PRO EM brand is compatible with these 3 PRO EM remote controls:

• PROEM ER2C4A39 (2 relay transmitter)
• PROEM ER4C4A39 (4 relay transmitter)
• PROEM ER2C4A39M (master transmitter with 2 relays)

The PROEM ER2C4A39M remote control is a master transmitter, which means it will transmit the code to the receiver as well as to the other transmitters. Using the master remote control requires precise learning of the transmitter’s code to the system.

Memorizing a New Transmitter

To program a transmitter to your PROEM RR2C4A39P receiver, you will need to follow these instructions:

• 1^st step: Select the contactor you wish to program: the green (PV) or the red (PR)
• 2^nd step: Then press the chosen contactor until the LED lights up
• 3^rd step: Immediately press the key you want on your transmitter to register it in the memory of the PROEM RR2C4A39P receiver. The LED should blink and the relay should switch

Technical Specifications

This receiver can hold up to 85 transmitter codes in its memory. With this receiver, you can easily register the transmitter code and display it. You can also display the memory position for the last transmitter you memorized and clear the full memory.

It has 2 relay contacts of type 1NO and 1NO or NF. Its frequency will be around 433.92 MHz and the local oscillator frequency will be 6.6128 MHz.

The PROEM RR2C4A39P receiver is equipped with LEDs, which will help you check the signal during the programming of your transmitter or receiver.

Its casing is beige and transparent. It is recommended to use your PROEM RR2C4A39P at temperatures between -20°C and +70°C to avoid any risk of system malfunction.

You benefit from a 24-month manufacturer’s warranty, starting from the date of manufacture of the product. This warranty does not cover issues related to your casing; it only concerns technical problems related to a manufacturing or operational defect.

Alloremotecontrol.com at Your Service

The PROEM RR2C4A39P receiver is always available on our site, as well as the compatible transmitters. If you wish to extend the warranty, it is possible. We invite you to visit our T&Cs. If you have a question, or if you would like information about the products on our site, you can contact us by email or through our online service.