Presentation of the MARANTEC D339.2-868 receiver This receiver was designed by MARANTEC to offer you a unique and comfortable motoring experience. MARANTEC receivers have remarkable quality and lifespan. Thanks to safe materials and unique professionalism, the MARANTEC brand guarantees you reliable and durable products. The MARANTEC D339.2-868 receiver meets the requirements of the R&TTE directive 1995/5/EC: this directive ensures European quality production and reliable materials. You can consult this declaration of conformity at any time from the manufacturer MARANTEC. This receiver has 1 channel: it will receive the transmitter code programmed on this channel and will switch electrical equipment according to the selected operating mode. If you wish, it is possible to connect a pulse button to the channel: this impulse button will switch the relay which corresponds to the chosen operating mode. To connect the pulse button, you will need the connection cable, included with your receiver. With this receiver, programming is easy and quick to carry out: if your gates or garage doors deliver a voltage of 12/24 Vac/Dc, they will be compatible with this receiver, whatever their brand. Installation of the MARANTEC D339.2-868 receiver This receiver must be installed on a wall, preferably flat. For this type of receiver, you will need to connect relay channel 1 to contactor NO1-COM-1. Registering a transmitter To register the code of a transmitter, you must follow the following instructions: Lift the shell of your receiver box Press and hold the TA1 button for 3 seconds Press the button of your choice on your transmitter in the 10 seconds following the operation If the LED lights up and goes out when you release the transmitter button, this means that your receiver has recorded the transmitter code Close the receiver shell These instructions can be found on the instructions for your receiver. If in doubt, do not hesitate to contact us. It is possible to erase the memory of transmitters stored in your receiver. To do this, carefully follow the following steps: Press and hold the TA1 button (which corresponds to channel 1) on your receiver The LED should flash after 3 seconds. If the LED lights up, this means that all transmitter codes have been deleted on the channel You can now release the button Compatible with 868Mhz frequency receivers The MARANTEC D339.2-868 receiver is available in two frequencies: this model operates at a frequency of 868Mhz, and will therefore be compatible with transmitters offering the same frequency. This universal receiver is also available in 433 MHz frequency under the MARANTEC D339.2-433 model. The MARANTEC D339.2-868 receiver is therefore compatible with the following MARANTEC transmitters: MARANTEC D302-868 MARANTEC D304-868 MARANTEC D321-868 MARANTEC COMMAND 131-868 Technical characteristics This receiver has 1 channel and will be tunable to a motor using to a connection cable: the power supply voltage of the MARANTEC D339.2-868 receiver, direct or alternating, is 12/24 V. It has a current absorption of approximately 50mA. Its dimensions are around 66 x 62 x 31 mm. Thanks to an IP20 protection index, your MARANTEC D339.2-868 receiver will be protected from possible intrusions by solid bodies. You can use your MARANTEC D339.2-868 receiver at temperatures between -20°C and 60°C. The MARANTEC D339.2-868 receiver on Allo Remotecontrol You can now order the MARANTEC D339.2-868 receiver as well as its compatible transmitters on our site. You will be able to extend the period of your warranty: to do this, do not hesitate to contact us if you would like more information. We can be reached by telephone and email.