Presentation of the FAAC T10E key switch (num.02) The FAAC T10E key switch (num.02) is available on Allo Remotecontrol. Accessory capable of controlling your gate in particular when opening and closing, this contactor aims to give an impulse when the corresponding key (in this case number 2) is inserted. Equipped with a mini-switch, this key switch is powered by 30 V (DC/AC) / 0.1 A. When activated, it can send a command to your automation. This is done simply by turning the key in the lock of this product. However, the key of this product can also return to its starting position when you release it, so be careful. Vigilant to your comfort, FAAC has worked hard to offer you a quality and durable product. This FAAC T10E key switch (num.02) has an IP54 protection rating. In fact, this means that dust and liquid splashes coming from all directions will have no effect on the operation of your product. In addition, note that the operating temperature of this system is -20/55°C. Which means that between these two temperatures, you will have no worries about the proper use of your product. Usable only with the FAAC keys provided with this product Please note that to operate, this FAAC T10E key switch (number 02) needs a key (two of them are provided inside your purchase). But this key was not chosen at random. This is a key named 02 that fits into this product. Therefore, NO other key with a different number can be inserted into your contactor. So be careful when purchasing this model and not the FAAC T10E key switch (number 06). Installation of the FAAC T10E key switch (num.02) This accessory, according to the manufacturer, can be installed on a wall, but also on a column. In the wall frame, note that the installation of this contactor must be carried out with a recessed tube / tube, but also an external sheath. How to install this product? First, prepare the electrical connections for your contactor. Then, attach the boxes with the corresponding gasket to install it on the wall. Do not hesitate to use the dedicated plugs and screws. Please note: this button is equipped with a mechanical safety stop. This does not allow the body of the case to be inserted or removed, unless you keep the lock turned using the key. As for the electrical connections, proceed as follows: First, make the electrical connections on the terminals of the mini-switches. Then remember that each mini-switch must be used to send only one command. Subsequently, make the electrical connections to the electrical control equipment, following the instructions in the instructions. Finally, using the components provided, assemble the FAAC T10E Bravo model! You are ready to use your product. The details of the instructions are given in the user manual available upon opening your product. FAQ for the FAAC T10E key switch (num.02) What are the dimensions of this product? This product has a length of 95 mm and a width of 70 mm as well as a thickness of 45 mm. Can you tell me more about the FAAC brand? Present on five continents and with around thirty subsidiaries around the world, FAAC has established itself as a benchmark in opening and closing automation solutions. This is thanks to the reliability, durability and elegant design of its products. FAAC offers automation for gates, for garage doors, for industrial doors, for pedestrian doors, as well as a multitude of other products and accessories intended to improve your comfort. Where can I find other FAAC brand products? You can find other FAAC brand products for your home on the Allo Remotecontrol website, by clicking here. Click and you will have access to a multiplicity of systems from the Italian brand. Why buy this product on Allo Remote Control? First, your order is shipped the same day Then the 1-year warranty is offered (possible extension up to 2 years – see T&Cs) Finally, telephone assistance (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) is available 5 days a week