Presentation of the PROEM SENSRAD4F Transmitter

The wireless touch button PROEM SENSRAD4F was designed by the PROEM brand. It’s an original and unique control remote: equipped with a touch-sensitive circuit and a radio transmitter, this radio button is ideal for controlling the opening and closing of your gates, garage doors, and other automation systems. Its touch technology will charm you with its practicality and originality. Forget your old “transmitter” remote and opt for the radio button PROEM SENSRAD4F, for simpler and faster control of your motors. No more buttons to control your automation; you just need to lightly touch the surface of your remote to control your systems. Handling becomes simpler and more interactive.

Design, Dimensions, and Weight

This radio button is original and discreet, it has a square shape and its touch platform is located at the top of the remote. It has managed to attract many users despite its tactile, ergonomic, and practical functionality. Its dimensions are 60mm x 90mm x 25mm and it weighs approximately 93g. Operating on finger contact, it will prevent accidental presses when you put it in your pocket or bag and further enhance the security of your automation.

Technical Specifications of the PROEM SENSRAD4F Radio Button

The radio button PROEM SENSRAD4F operates at a frequency of 433.92 MHz FM. It benefits from the Rolling code encoding system, which will provide your remote and motors with additional security through a non-clonable code technique. This radio button must be powered by a CR123A lithium battery (included with purchase). It has an IP55 protection rating, allowing for outdoor use with temperatures ranging from -20°C to +80°C. If these temperatures are not respected, your transmitter may exhibit operational issues or may stop functioning. Be sure to adhere to the temperature limits. To do this, avoid leaving your transmitter in the sun or on frozen/snowy surfaces.

Where and How to Mount the Radio Button?

The radio button PROEM SENSRAD4F is fixed to flat wall surfaces. Ensure that the surface is flat and free of bumps or other obstacles. Also, avoid metallic surfaces that may block the radio signal from your transmitter.

• Mark the location for 4 fixing holes using the casing.
• Then drill the holes and insert the plugs.
• Fix the casing with the 4 screws
• Install the module in the casing and secure it with the screws

How to Use Your Touch Transmitter

To operate your touch button PROEM SENSRAD4F, it’s very simple: just lightly touch the surface with your hand. Depending on the surface on which you mount your touch button, sensitivity may vary: for example, metallic surfaces can increase sensitivity but significantly reduce the range of radio transmission. To adjust sensitivity, bring your hand close or lightly touch until the signal sounds. Do not use just your finger but your whole hand for optimal handling. The radio transmission lasts as long as the signal sounds.

How to Insert or Replace the CR123A Lithium Battery?

To operate the touch radio button PROEM SENSRAD4F, you will need to use the CR123A battery. This battery will be provided with the purchase of your radio button. To change it, simply insert it into the designated slot, ensuring to respect the polarity. Be careful to position the battery correctly.

Why Buy the PROEM SENSRAD4F Touch Radio Button on Alloremotecontrol.com?

First, you can benefit from free shipping for the purchase of 2 remotes or more. Your order will be shipped on the day of your order. You will receive, along with your radio button, the compatible batteries and its manuals.

A 1-year warranty is offered to you (with a possible extension of an additional year – see T&Cs). If you have any questions, our phone or email support is available for you 5 days a week.

Make your purchase with peace of mind thanks to the one-year warranty offered by Alloremotecontrol.com to its customers on all its products. Even better, why not opt for a second year of additional warranty when finalizing your order? (See T&Cs)