Presentation of the PROEM Wiegand RRUMP4F radio receiver The PROEM Wiegand RRUMP4F radio receiver is a “superheterodyne” type receiver, which means that it is made up of 4 different parts: The local oscillator The fixed filter The amplifier The mixer The mixer is the most important part of the PROEM Wiegand RRUMP4F radio receiver. This receiver operates at a frequency of 433.92 MHz and at a frequency of 868.30 MHz in FM modulation. The PROEM RRUMP4F radio receiver is equipped with a main circuit in which the power supply output connections are located via an RF card. The outputs both have a signal: one has a “wiegand 26” or “bi-format wiegand 30” format signal, and the other has a “RF Bus” type signal. The PRO EM brand, creator of Wiegand receivers The PROEM Wiegand RRUMP4F radio receiver is a receiver produced by the Italian brand PRO EM, innovator and manufacturer of products and accessories for your automations. PRO EM developed in 2000 and has gradually spread its professionalism throughout Europe. PRO EM is recognized today as one of the leading brands in the creation of motorized solutions. Thanks to its innovation and its ever more authentic designs, the PRO EM brand allows you every day to benefit from the best models and accessories for your gate and garage door automations. Characteristics and compatibilities of the PROEM RRUMP4F receiver The PROEM RRUMP4F receiver will allow you to receive the signal from your transmitter in order to operate your motors. The receiver is therefore a key element of your automation. It will operate at a frequency of 433.92 MHz or 868.30 MHz depending on the model. Its dimensions of 109 x 109 x 56 mm make it a compact and easy to transport receiver, notably thanks to its weight of 65g. It has an IP56 protection rating: it can operate at temperatures not exceeding -20°C and 70°C. Note that your PROEM RRUMP4F receiver has a transparent case with an IP65 protection rating, so that you can protect it from climatic conditions, thanks to foolproof waterproofing. The PROEM Wiegand RRUMP4F receiver is not compatible with all transmitters in the PRO EM range. Among all the remote controls in this range only the following will be compatible with this transmitter: ER2C4F-S ER4C4F-S ER2C8F-S ER4C8F-S Installing your receiver In order to install your PROEM Wiegand RRUMP4F receiver in optimal conditions and avoiding any risk , we advise you to follow these tips: First, make sure to install your receiver as far away as possible from sources of interference: to do this, avoid installing your receiver near radio broadcasts, your computers, or any magnets. Then prioritize optimal installation: ensure that the radio antenna is well positioned. To do this, perform a few tests in this location before configuring your receiver. During installation, we advise you to use RG58 type cables to connect it to the antenna. Why order the PROEM Wiegand RRUMP4F receiver on our site? By ordering your PROEM RRUMP4F Wiegand Clock and data receiver on alloremotecontrol.com, we can offer you delivery for the purchase of 2 or more remote controls. With your receiver, the programming and user instructions as well as compatible test batteries will also be sent to you free of charge. You can extend your warranty and opt for an additional year of warranty (see our T&Cs). You can find the ER2C4F-S and ER4C4F-S remote controls on our site, as well as many other ranges of PRO EM remote controls. If you have any questions about the PROEM RRUMP4F receiver or any other product available on our site, you can contact us by email or telephone. An online service is also dedicated to you so that you can ask us your questions.