Presentation of the MARANTEC COMMAND 131 868 transmitter The MARANTEC COMMAND 131 868 remote control allows you to easily operate the automations installed in your home from your home. This model is available in two frequencies: 868.3Mhz and 433.920Mhz. To differentiate the two models, you will need to check the colors of the case: the case of the MARANTEC COMMAND 131 433 remote control is of a uniform color, while that of the MARANTEC COMMAND 131 868 remote control is darker at the back. These two models are therefore different in color and frequency. For the rest, they will provide the same capabilities, but will not be compatible with each other. The MARANTEC COMMAND 131 868 remote control will be compatible with MARANTEC receivers operating at the same frequency. For example, if you have MARANTEC D343 868, MARANTEC D166-868 or MARANTEC D168-868 receivers, you can easily equip yourself with the MARANTEC COMMAND 131 868 remote control. The case of this transmitter is designed to be fixed to the wall. It’s a simple way to be able to control your automations from any room in your house. Technical characteristics of the MARANTEC COMMAND 131 868 transmitter The MARANTEC COMMAND 131 868 remote control has two buttons, which can be used to control up to two automations. Thanks to the self-learning programming system, you can carry out this process quickly and easily. You can attach this wall box to flat walls. With dimensions of 11 x 8 x 6 mm, the wall contactor can be installed almost anywhere. To recharge your contactor, you will need to change the batteries approximately every two years. Compatible batteries are 3V batteries, preferably CR2032 type. Precautions for use Be careful, however, during installation, be sure to remove the parts at the front and back of your case. Remember to install the battery before carrying out assembly and to carry out coding and connection of external control elements. If you have external contactors, you can screw connection cables to these contactors. The connection cables will be screwed onto the connections, located on the back of your remote control case. If the connection cable is longer than 3 meters, it will be incompatible: consider getting a shorter cable. Power supply The MARANTEC COMMAND 131 868 transmitter will require 3V batteries: the ideal would be CR2032 type batteries. Remember to insert the batteries into the case, respecting the polarity. Don’t forget to insert the batteries before installing your wall contactor. Coding To transfer coding from an old remote control, using self-learning, you will need to have the coding cable supplied with your box. For programming, you will first need to connect the wall contactor and your old remote control using this coding cable. Then, all you have to do is press one of the buttons on your old remote control and keep it pressed until the LED lights up. Then, repeat this step with one of the buttons on your wall contactor until the LED flashes quickly. One to two seconds following this step, the wall contactor diode emits a constant light, indicating the end of programming. Recoding It is possible to change the coding: this process must be carried out separately for all keys. The steps in this process are described in the instructions for your MARANTEC COMMAND 131 868 remote control. Once the recoding has been carried out, you will also have to reprogram the controlled installation to the new coding, because the old one will have been lost. The MARANTEC COMMAND 131 868 transmitter available now On Allo Remotecontrol.com, you have the choice of a large number of remote controls and accessories for your motorization systems. If you are interested in the MARANTEC COMMAND 131 868 transmitter, you can order it now on our site. For the purchase of two or more remote controls, your delivery will be free, so don’t hesitate! For any other information regarding our guarantees, go to our General Terms and Conditions.