Presentation of the MARANTEC COMMAND 131 433 transmitter The MARANTEC COMMAND 131 433 remote control allows you to easily and quickly operate your motor equipment installed from your home. The MARANTEC COMMAND model exists in two frequencies: 868.3 MHz and 433.920 MHz. In order to distinguish the two models, it is necessary to check the color of the case: the color of the shell of the MARANTEC COMMAND 131 433 remote control is uniform, while the back of the shell of the MARANTEC COMMAND 131 868 remote control is darker . Therefore, the two models have different colors and frequencies. For the rest, they will provide the same capacity, but are not compatible with each other. The contactor is designed to be wall mounted, it is a simple way to control your automations from any room in the house. We advise you to install it in a sheltered location, and preferably on a flat wall. Technical characteristics of the MARANTEC COMMAND 131 433 transmitter The MARANTEC COMMAND 131 433 transmitter has two buttons and can be used to control up to two automations. With a self-learning programming system, you can complete this process quickly and easily. You can mount this wall box on a flat wall. The wall contactor measures 11 x 8 x 6 mm and can be installed almost anywhere. To charge the contactor, you need to replace the battery approximately every two years. The compatible battery is a 3V battery, preferably CR2032. Encoding method Using the self-learning function, the code can be transmitted from the old remote control. You must have the coding cable supplied with the box. To program, you must first use this cable to connect the wall switch to the old remote control. Then simply press and hold one of the buttons on the old remote until the LED lights up. Then, repeat this step using one of the buttons on your MARANTEC COMMAND 131 433 wall contactor until the LED flashes quickly. One to two seconds after this step, the wall contactor LED will emit a steady light, indicating that programming is complete. Recoding method The encoding can be changed: this process must be done separately for all buttons. The steps of this process are described in the instructions for your MARANTEC COMMAND 131 433 remote control. Once the recoding is done, the old encoding is lost, you must also reprogram the installation with the new encoding. Batteries and power supply for your MARANTEC COMMAND 131 433 contactor The MARANTEC COMMAND 131 433 transmitter will require 3V batteries: ideally a CR2032 battery, for a frequency of 433.920 MHz. Remember to respect the polarity when inserting the batteries. Remember to insert the batteries before installing your wall contactor. Installation and Precautions When installing, be sure to remove the parts from the front and back of the contactor. Remember to install the battery before installation, code and connect external control elements. If you have external contactors, you can screw the connecting cables to these contactors. The connecting cables will be screwed onto the connectors, which are located on the back of the remote control case. If the connection cable is longer than 3 meters, it is not compatible: consider choosing a shorter cable. The MARANTEC COMMAND 131 433 transmitter on Allo Remotecontrol If you are interested in the MARANTEC COMMAND 131 433 transmitter, you can order it now on our site. If you buy two or more remotes, your delivery will be free, so don’t hesitate! For any other information on our guarantees, do not hesitate to visit our General Terms and Conditions.