Presentation of the V2 PHOX-4 C.769 Warning: If you are replacing a V2 brand remote control, check that it says “CONTR. 769” on the back of your remote control. Do not hesitate to contact us if your contract code is not one of those presented on the site. The V2 PHOX-4 remote control (with contract code C.769) will allow you to control your gate or garage motorization in the way you want. A four-button model, this V2 PHOX-4 C.769 will soon be indispensable to you. In fact, thanks to this, you will be able to activate an opening or closing command for your motor just with this single device. Coded with a radio frequency of 433.92 MHz, this beep gives you, with this number, optimal signal range. Powered by a 23A 12 V alkaline battery, this transmitter will give you great reliability despite daily use. Transportable at your convenience. Sober in appearance, the dimensions of this beep, 55 mm in height, 13 mm in thickness and 32 mm in width, are minimal. Thanks to this data, you will be able to store the V2 PHOX-4 C.769 very easily. In a pocket, in a handbag or even in a storage space in your car to have it nearby, you will not be bothered by its size. In addition, the appearance of the V2 PHOX-4 C.769 will not stand out in your environment. Coated in black, this beep is also accompanied by keys marked with a small white circle. Ideal for knowing which buttons to press to trigger your motor and thus limit operating errors. Compatibility of the V2 PHOX-4 C.769 This remote control is compatible with the following transmitter: The V2 PHOENIX C.769 device Please note, this remote control is not compatible with the following models, despite their identical appearance. In fact their contract code is different: The V2 PHOX remote control “CONTR.47” The V2 PHOX model “CONTR.50” The V2 PHOX transmitter “CONTR.17” The V2 PHOX device “CONTR.002″ The V2 PHOX remote control ” CONTR.126″ Programming the V2 PHOX-4 C.769 For more information, you can consult the programming instructions for this remote control by clicking here. To program your remote to a receiver, you must: First, open the case of your receiver. It is located near your motorization. Next, on the receiver board, press the programming button SW1. The receiver LED L1 lights up. Then, within 5 seconds, press the button on your new remote. Hold it down. The receiver LED flashes once. Then release the button. Wait 10 seconds. Congratulations ! Your new remote control is programmed. V2 PHOX-4 C.769 FAQ Can you tell me more about V2 Remote Controls? V2 Remote Controls is an Italian company which, since 1985, has been designing and developing integrated systems for home automation, guaranteeing comfort and safety on a daily basis. V2 remote controls are studied and developed by a homogeneous group of enthusiastic and motivated people, putting their ability and experience to meet the requirements of their customers. Where can I find other products from the V2 Remote controls brand? You can find other products from the V2 Remote controls brand on the Allo Remote control website by clicking on the link here Why buy this product on Allo Remote control? First, know that your satisfaction is the priority. We will handle your product with great care. Then, your order is shipped the same day. Then the 1 year warranty is offered (possible extension up to 2 years – see CGV) Finally, telephone assistance (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) available 5 days a week