Product description The Marantec Digital 344.2-433 universal receiver is a receiver suitable for managing all automatic doors, such as gates and garage doors. Its operating frequency is 433 MHz. It has an ON / OFF type pulse: the function you choose will be applied to the 2 channels installed on the Marantec Digital 344.2-433 receiver. You can pair Marantec remote controls that operate on the same frequency. The Marantec Digital 344.2-433 universal receiver is an integral part of a series of products designed by Marantec to ensure the protection of property and people: it is a very safe system that allows you to benefit from a reliable electrical system and powerful. The receiver has an IP 65 degree of protection: this means that it can withstand humid environmental conditions, water and dust. Using this model, you can connect two control elements (two remote controls or wall switches) and you can use it for your Marantec motorization systems, for your garage doors, your gates and even your motorized exterior lighting. This receiver is also equipped with multi-bit technology. How to memorize transmitters on the Marantec Digital 344.2-433 receiver? It is entirely possible to memorize several transmitters on the Marantec Digital 344.2-433. Indeed, thanks to the large memory of this receiver, you will be able to program numerous remote controls: its memory will almost never be full. All transmitters can be memorized by self-learning, and this system will greatly simplify the initialization of your new remote controls in the receiver’s memory. Therefore, programming a new remote control via the receiver or the old remote control will no longer be a difficult task. To register a compatible transmitter on your Marantec Digital 344.2-433 receiver, nothing could be simpler: First remove the case from your receiver Then, set your transmitter to the channel of your choice (if you used channel 1, register a new transmitter on channel 2): ​​To do this, press and hold the TA1 or TA2 button (channel 1 or 2) for at least 3 seconds Then press the button of your choice on the new transmitter within 10 seconds after the operation The LED should light up: this indicates that your Marantec Digital 344.2-433 receiver has correctly registered the new transmitter. You can then release the button and close the case of your receiver Clear the receiver memory To clear the memory of the Marantec Digital 344.2-433 receiver, when you want to reset a channel, for example, the operation will also be very simple and quick: Press and hold TA1 or TA2 (depending on the channel to be reset). After 3 seconds, the LED indicator flashes and after removing all transmitters from the channel memory, the LED indicator turns on. Then you can release the TA button. Your channel has been successfully reset. You can now register a new remote control. The attributes of the Marantec Digital 344.2-433 receiver The Marantec Digital 344.2-433 receiver benefits from a 12-24V AC/DC power supply and a current consumption of approximately 50 mA. Its IP65 protection rating can protect its shell from humidity and rust. Therefore, you can install it outside without its operation being disrupted. It can withstand temperatures from -20 to 60°C. Its operating frequency is 433 MHz and is compatible with all transmitters of this frequency. This product benefits from a 1-year warranty offered by Allo Remotecontrol upon purchase. This only covers defective or poor quality parts: it does not cover failures due to poor maintenance of the product. If you wish, this warranty can be extended to an additional year. Our General Terms and Conditions are there to help you see things more clearly: do not hesitate to consult them.