Presentation of the CARDIN SRC TXE transmitter The CARDIN SRC TXE transmitter is a radio bridge transmitter receiving the connection of a resistive probe, also called resistive safety edge. It permanently transmits its status to the CARDIN SRC RXE receiver, available on Allo Remote Control. With this device, you will be able to increase your safety and that of your environment by avoiding entrapments but also limit cables, because this system works thanks to radio wave communication. The CARDIN system, the CARDIN SRC TXE transmitter, is a transmitter that you can apply to your security systems, in particular your CARDIN brand safety edges such as: The CARDIN NC8K2L16N (1.6m) safety edge for sliding and swing gates The device CARDIN NC8K2L20N (2 m) for sliding and swing gates Thanks to the bidirectional function and battery power, the CARDIN SRC TXE is in communication all the time and makes your system intrinsically safe. With a frequency of 868 MHz, you can memorize up to four different frequencies with this device. Robust and reliable In addition, the SRC TXE can operate on 4 different frequencies to avoid interference in the event that several receivers are installed nearby. Also, this transmitter is powered by 2 batteries of 3 V AAA batteries. You can therefore use it for an extended period of time. It also has a range of 20 m and has an IP 65 protection rating. That is to say, it is protected against dust and against jets of water coming from all directions. Programming the CARDIN SRC TXE transmitter For more information on the installation of this receiver, please consult the instructions for this product on Allo Remote control by clicking here How to install your transmitter in 3 steps: First, fix the transmitter in the point highest part of the door with the antenna pointing downward and close to the sensitive edge (Fig. 3). Then connect the sensitive edge to the transmitter terminal block with max. 5 meters and minimum section of 1 mmq (pos. 4 – Fig. 4). The sensitive edge must be of the NO resistive 8.2 KOhm type. In the case where a sensitive NC rating is used, it is obligatory to use the 8.2 KOhm resistor in series. Then, hold the cables as close as possible to the terminal block (Fig. 2). Finally, put the batteries in the transmitter, paying close attention to the polarity, and check that the LED (pos. 3 – fig.4) lights up for a moment. CARDIN SRC TXE FAQ Up to what temperature can I use this transmitter? This transmitter can be used in temperatures ranging from -20°C to 60°C. Which receiver can I pair this transmitter with? You can pair this transmitter with the CARDIN SRC RXE receiver available on Allo Remote Control. Can you tell me more about the CARDIN brand? To begin with, in the world of home automation, the Italian brand CARDIN has made its way since the year of its creation in 1974. In the DNA of this brand, there is a real desire to offer you simple, ergonomic systems. and reliable for automation and access control. This by making a relevant choice in the materials selected for each of their products. Finally, striving for excellence for them is part of normality. Moreover, many of their products, whether remote controls, receivers or batteries, are used every day around the world by various consumers. Where can I find other CARDIN brand products? You can find other CARDIN brand products on Allo Remote Control by clicking on the link here Why buy this product on Allo Remote Control? First, know that your satisfaction is the priority. We will handle your product with great care. Then, your order is shipped the same day. Then the 1 year warranty is offered (possible extension up to 2 years – see CGV) Finally, telephone assistance (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) available 5 days a week