Presentation of the NICE FLO 2R-S Remote Control

The NICE FLO 2R-S remote control is available on Alloremotecontrol. A best-seller from the brand, it allows you to control the opening and closing of your gate or garage from a distance. With its self-learning programming from a receiver, using it is like child’s play.

Two Different Programmable Devices

Thanks to the two buttons on the NICE FLO 2R-S remote control, it is possible to program two different devices. Its frequency of 433.92 MHz allows it to be used at a range of 150 meters outdoors and 35 meters indoors. Furthermore, its security is ensured by encrypting radio waves, with an IP40 protection rating thanks to the rolling code. Additionally, it is powered by a 12V type 23A battery.

Comfort and Ergonomics

Sturdy, the NICE FLO 2R-S remote control offers immediate comfort by combining formidable reliability. As a guarantee of quality and to fully satisfy its customers, Alloremotecontrol offers a one-year warranty on all its products. Even better, you can opt for a second year of additional warranty when placing your order (see T&Cs).

Finally, its black color, enhanced with blue accents, and its rectangular shape ensure easy transport in a keychain or pocket.

Compatibility of the NICE FLO 2R-S Remote Control

Update: This remote control replaces the model NICE FLO1R

The following models are compatible with the NICE FLO 2R-S remote control:

• with NICE receivers using rolling code and having a frequency of 433.92 MHz such as:
  • NICE SMXI
  • NICE FLOX2R
  • NICE OX2

Additionally, this remote control is compatible with the NICE ON2E.

Note: Although its design and handling are similar to the NICE FLO 2R-S, the NICE FLO2 is not compatible with this model.

Programming the NICE FLO 2R-S Remote Control

Thanks to self-learning, the black casing is simply programmable.

To program the NICE FLO 2R-S remote control, two methods are possible depending on your configuration:

From an Already Programmed Remote Control:

1. Approach your installation at a distance of 1 to 2 meters.
2. Press the button on your new remote control for 5 seconds.
3. Gently press the button on your already programmed remote control, respecting a one-second delay between each press.
4. Once done, press a button on your new remote control. Then, release the pressure. Wait for 10 seconds.
5. Finally, your new remote control is ready to be used.

From a Receiver:

1. Open the casing of your receiver, located next to the motorization.
2. Press the programming button P1 on the receiver board. Hold it down. When the receiver’s LED is on, release the button.
3. Press a button on your new remote control. Release it. The receiver’s LED will turn off.
4. Wait 1 second, then press the button used during step 3 on your new remote control.
5. Release it. The receiver’s LED will blink 3 times.
6. Finally, wait 10 seconds.
7. Congratulations, you have successfully programmed your new remote control!

FAQ about the NICE FLO 2R-S Remote Control

What are its technical characteristics?

With a height of 72 mm, a thickness of 15 mm, and a width of 40 mm, one of the best sellers from the NICE brand will never be far from you. Moreover, its ergonomic design ensures optimal transport.

With which transmitters does it work?

The transmitter from the NICE brand works only with receivers of the same brand and frequency.

How is the Rolling-code technology beneficial?

This technology allows for the encryption of radio waves and ensures that cloning the remote is impossible. This means you can open and close your device without any worries!

Where can I use the remote control?

The remote control can be used:

• In a single-family home, it will only take a few minutes to install thanks to its self-learning programming.
• In some cases, in a co-ownership. To find out if the radio receiver is locked, you need to inquire with your system installer.

Are there other NICE products available?

Yes. On Alloremotecontrol, you can browse a multitude of NICE references. They are available on Alloremotecontrol by clicking this link.