Presentation of the PROEM SENSRAD4F transmitter The PROEM SENSRAD4F wireless sensitive button was designed by the PROEM brand. It is an original and special remote control: equipped with a tactile sensitivity circuit and a radio transmitter, this radio button is ideal for controlling the opening and closing of your gates, garage doors and other automations. Its touchscreen technology will seduce you with its practicality and originality. Forget your old “transmitter” remote control and opt for the PROEM SENSRAD4F radio button, for simpler and faster control of your motors. No more need for buttons to control your automations, all you need to do is touch the surface of your remote control to control your automations. Manipulation therefore becomes simpler and interactive. Design, dimensions and weight This radio button is original and discreet, it is square in shape and its touch platform is located at the top of the remote control. It has attracted many users despite its tactile, ergonomic and practical functionality. Its dimensions are 60mm x 90mm x 25mm and it weighs approximately 93g. Operating on contact with your finger, this will prevent involuntary presses when you put it in your pocket or bag and further strengthen the security of your automations. Technical characteristics of the PROEM SENSRAD4F radio button The PROEM SENSRAD4F radio button operates at a frequency of 433.92 MHz FM. It benefits from the Rolling code coding system, a system which will guarantee your remote control and your motors additional security thanks to a non-clonable code technique. This radio button must be powered by a CR123A lithium battery (provided with purchase). It has an IP55 protection rating, which allows outdoor use with temperatures between -20°C and 80°C. If these temperatures are not respected, your transmitter may exhibit operating problems, or may no longer work. Be sure to respect temperature limits. To do this, avoid leaving your transmitter in the sun or on frozen/snowy surfaces. Where and how to attach the radio button? The PROEM SENSRAD4F radio button attaches to flat wall surfaces. Make sure the surface is flat and does not contain bumps or other obstacles. Also avoid metal surfaces which can block the radio signal from your transmitter. Mark the location of 4 mounting holes, using the box. Then drill the holes and insert the dowels. Secure the case with the 4 screws Install the module in the case and secure it with the screws How to use your touch transmitter To operate your PROEM SENSRAD4F sensitive button, nothing could be simpler: you just need to touch the surface with your hand . Depending on the surface on which you attach your sensitive button, the sensitivity may vary: for example, metal surfaces can increase the sensitivity but considerably reduce the range of radio transmission. To adjust the sensitivity, approach or touch your hand until the signal sounds. Use not just your finger but your entire hand for optimal handling. The radio transmission lasts as long as the signal sounds. How to insert or replace the CR123A lithium battery? To operate the PROEM SENSRAD4F sensitive radio button, you will need to use the CR1223A battery. This battery will be provided when purchasing your radio button. To change it, simply insert it in the location provided for this purpose, making sure to respect the polarity. Be careful to position the battery correctly. Why buy the PROEM SENSRAD4F sensitive radio button on alloremotecontrol.com? First, you will be able to benefit from free delivery when purchasing 2 or more remotes. Your order will be shipped on the day of your order. You will receive, with your radio button, compatible batteries and instructions. A 1-year warranty is offered to you (with a possible extension of 1 additional year – see T&Cs). If you have any questions, our telephone or e-mail support is available for you 5 days a week. Make your purchase with complete peace of mind thanks to the one-year warranty offered by Allo Remotecontrol.com to its customers on all its products. Better yet, why not opt for an additional second year of warranty when placing your order? (See T&Cs)