Presentation of the ROGER SYNUS/2 The ROGER SYNUS/2 is a remote control from the ROGER brand powered by 3V (DC). Unlike the majority of remote controls which only have one code, this one has two. It is also: in fixed code in rolling code The frequency of this remote control is 433.92 MHz, which gives you good signal quality. So when you unlock your entrance or close it, you will not be bothered by potential interference. In addition, ROGER informs you that the maximum range of this transmitter is 150 m. So that the opening and closing commands are assigned simply, know that the ROGER SYNUS/2 has two channels. In addition, to withstand several weather conditions, this transmitter has been tested. After this intensive phase, it was recorded that the operating temperature is between -10°C and 55°C. ROGER SYNUS/2 Compatibility This transmitter is compatible with: all H93/RX22A/I R93/RX12A/I R93/RX12A/U fixed code series receivers They can be configured to alternately operate in “Rolling Code” mode and be used with Roger receivers of the H93/RX2RC/I, R93/RX2RC/U series. Programming the ROGER SYNUS/2 Do you want to program your ROGER remote control? This manufacturer has set up a multilingual notice available on our site. You can consult it by clicking here. ROGER SYNUS/2 FAQ What are the dimensions of this remote control? The dimensions of this remote control are as follows: 66 mm high 34 mm wide finally it is measured at 10.4 mm thick Also note that it weighs 40 grams. Why buy this product on Allo Remote Control? First, your order is shipped the same day Then the 1-year warranty is offered (possible extension up to 2 years – see T&Cs) Finally, telephone assistance (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) available 5 days a week