Presentation of the MARANTEC D392-868 remote control The MARANTEC D392-868 remote control will effectively control your motors thanks to its 2 buttons. This new model is the replacement for the MARANTEC D313-868 and MARANTEC D321-868 models. Thanks to it, you can control up to 2 automations in your home at the same time: each button will control a different automation. Equipped with self-learning, you can easily program it to your receiver, using your old remote control. The programming instructions as well as the test battery will be offered to you with your remote control. Characteristics and attributes The MARANTEC D392-868 digital transmitter will operate at a frequency of 868 MHz and will require, for its power supply, a 3V lithium metal battery type C2032 (test battery supplied). For programming, the remote control will require a coding socket in order to simplify this intervention. This socket will also be provided with your remote control. This digital remote control is miniature in size to allow you a more pleasant grip, and a light weight for daily and repeated use. Its dimensions are 54 x 39 x 14 mm. It will be fully compatible with the following MARANTEC transmitters: MARANTEC D302-868, MARANTEC D321-868 and MARANTEC D382-868. Its design is sleek and sophisticated: in fact, this remote control is rather discreet given its size and colors. Its case is gray-black in color and contains an eyelet so you can attach it to your key ring. Programming the MARANTEC D392-868 transmitter Thanks to the coding socket provided with your transmitter, and your old remote control, you will be able to program your new MARANTEC D392-868 transmitter easily and quickly: 1st step: Start by linking the two remote controls with the coding socket 2nd step: Activate the coded transmitter and keep the button pressed until the indicator light comes on 3rd step: Press the selected button on your new remote control while keeping the button on the first remote control pressed 4th step: 1 to 2 seconds following this step, the indicator light on your new remote control remains on. This means that programming is complete and your MARANTEC D392-868 remote control is ready for use. You can now remove the coding plug. If you lose one of the transmitters If you have lost one of your transmitters, please note that you can change the coding of your remote control. To do this, you will need to connect the coding socket (the one used for programming) to the transmitter which must receive new programming. For this configuration, we advise you to follow the steps below: 1st step: Insert the coding plug into your transmitter 2nd step: Short-circuit one of the outer pins of the coding plug with the central wire (you can using a screwdriver) 3rd step: Press the selected button on the hand transmitter. Random programming will allow a new code to be established and saved: the indicator light should flash very quickly 4th step: If the transmitter LED remains lit, this means that the operation was successful: you can then release the button on your remote control and remove the coding plug. Remember: once you have carried out the new coding on your receiver, you will absolutely have to reprogram your motor because the code has been modified. Free delivery for the purchase of two remote controls On Allo Remotecontrol.com, we have decided to offer you delivery for the purchase of two or more remote controls. Ideal if you want to have peace of mind and always have a spare remote control with you. So don’t hesitate any longer, order your new MARANTEC D392-868 remote control. If you have any questions, particularly regarding programming or warranty, please do not hesitate to contact us.