Presentation and programming of the 3-channel transmitter MARANTEC D323-868 This transmitter is innovative because it allows you to recharge and control automations and motorization systems of all kinds from your car. The MARANTEC D323-868 transmitter does not require batteries, since it recharges from your cigarette lighter, or by plugging it into your car (12V max). You can replace your old MARANTEC remote controls with this transmitter, provided that they operate at the frequency of 868 MHz. The programming system remains the same as that of other MARENTEC remote controls: self-learning. You will thus be able to program this transmitter using an old remote control, using the pin provided when you ordered. To program your cigarette lighter transmitter, nothing could be simpler: take your old transmitter and follow the following instructions step-by-step: 1st step: Using the pin provided, connect your old remote control to the remote control MARANTEC D323-868 2nd step: Press one of the buttons on your old remote control: keep it pressed until the LED on your old remote control lights up 3rd step: While you are holding down the button, press one of the buttons on your new MARANTEC D323-868 remote control and keep it pressed until the LED lights up. 4th step: Then release the buttons 5th step: If you wish to program several buttons, repeat this procedure for each button you wish to program 6th step: Wait approximately 10 seconds 7th step: Your MARANTEC D323-868 transmitter is programmed and ready to use use If you wish to program your MARANTEC D323-868 transmitter from your receiver, without using the remote control, it is possible. On the other hand, this method is only recommended if you no longer have working remote controls, because it deletes all the remote controls already registered. We have listed the programming steps below: 1st step: Press the P button and hold it until indicator light 2 flashes 2nd step: Press the P button repeatedly until indicator light 7 flashes 3rd step: Press one of the buttons on your MARANTEC D323-868 remote control until indicator 7 flashes more quickly 4th step: Press and then release the P button: then wait for approximately 10 seconds 5th step: Your MARANTEC D323- transmitter 868 is programmed and ready to use Characteristics and attributes of the MARANTEC D323-868 transmitter The MARANTEC D323-868 transmitter operates at the frequency of 868 MHz and does not require a battery for its power supply: you can connect it to your cigarette lighter to recharge it. It can be controlled from your car, even if it is plugged in. So, you can place it on your cigarette lighter to control your engines and in this way, you will avoid losing it. Thanks to this system, the MARANTEC D323-868 transmitter is part of the range of practical and functional transmitters, due to its ease of use. In terms of its design, this transmitter stands out from the others: its round shape allows optimal comfort for its users, and its gray colors offer unrivaled sobriety. Its weight of 18g makes it a pleasant and space-saving transmitter. It offers its users interesting dimensions: a diameter of 37mm for a length of 64mm. Equipped with the Rolling code system, this remote control is a guarantee of security. You will have the ability to code up to 281 trillion codes. This transmitter is controllable at temperatures between -20°C and 60°C. Thanks to its IP54 protection rating, your transmitter will be protected from water jets and dust projections. Enjoy free delivery with the purchase of two remote controls! Thanks to Allo Remotecontrol.com, you can benefit from free delivery if you decide to buy at least two remote controls. Buying two remote controls may be necessary in case one of them breaks down or malfunctions. This way, you will have a spare one with you. For any additional information, go to our General Terms and Conditions or contact us. We are available for you 5 days a week.