Presentation of the CAME RE862M receiver To ensure that your motors are functional, the CAME RE862M receiver is the tool you need. Cutting-edge equipment, it allows you to control your automations and motors in complete safety. Programmable by self-learning One of the advantages of this receiver lies in its self-learning coding. That is to say that this system allows you to directly record your transmitter in the memory of this receiver. This way, you can program your transmitter in the receiver’s memory, without calling a technician. Calibrated to a frequency of 868.35 MHz Powered with a 12-24 V (AC-DC) power supply, this receiver works with devices with a frequency of 868.35 MHz. In addition, the connection of this receiver is carried out by screw terminal block under housing. Additionally, this receiver has two channels, which are configurable as you wish. Resistant to climatic conditions The engineers of the Italian brand have done everything to ensure that this CAME RE862M receiver is robust and reliable over time. It has been classified with the IP 54 protection index. These figures indicate that the receiver is protected against dust. In addition, it is also against splashing water in all directions. In addition, this receiver will be useful to you if you want to use it in any climatic conditions. Functional at a cool temperature of -20°C, it is also up to 55°C. In addition, with its 108 mm in height and 46 mm in width, this CAME RE862M receiver has dimensions that will allow this device to be discreet in your home. A one-year warranty is offered by Allo Remotecontrol on all its products in order to guarantee total satisfaction to its customers. Better yet, you will also have the option of adding a second year of additional warranty when finalizing your order (see T&Cs). Compatibility of the CAME RE862M receiver This receiver is compatible with the following transmitters with a frequency of 868.35 MHz (non-exhaustive list): The CAME TOP-862NA The CAME TOP-864NA model The CAME TOP-862EE transmitter The CAME TOP-864EE remote control The CAME TW2EE The CAME TW4EE model The CAME ATOMO models Programming the CAME RE862M receiver WARNING: This product must only be handled and installed by qualified personnel For more information on the installation of your receiver, we invite you to consult the PDF instructions of the product by clicking here How to memorize your codes: First, press a code memorization button until the LED flashes. Then press the button of the transmitters to be memorized on the selected channel, one after the other. Each time you press it, the LED stays on continuously for a few moments. Finally, after the last transmitter, wait for the LED to go out (approximately 20 seconds) or press the CLEAR key to complete the memorization. Note: The LED will flash quickly when the memory is full CAME RE862M Receiver FAQ What are the key data of this receiver? The CAME RE862M receiver is powered by 12-24 V (AC-DC) and is calibrated to a frequency of 868.35 MHz. Additionally, this receiver has two channels, which are configurable as you wish. Also, with its 108 mm in height and 46 mm in width, this CAME RE862M receiver has dimensions that will allow this device to be discreet in your home. This receiver can also be used in temperatures up to 55°C but also when cool down to -20°C. Where can I find other CAME brand products? You can find other products from the Italian brand CAME (remotes; receivers) on our site by clicking on the link here Why buy the CAME RE862M receiver on Allo Remotecontrol? Free delivery for the purchase of 2 remote controls or more Same day dispatch of your order Free test batteries 1 year warranty offered (possible extension up to 2 years – see T&Cs) Telephone support (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) available 5 days a week