The remote control PROTECO TX433405 will guarantee you maximum comfort by allowing you to control your automation with ease. Thanks to this very ergonomic transmitter PROTECO TX433405, managing your motorizations will become a magical experience! Extremely easy programming; you just need to follow the procedure described in the manual to get your new remote control up and running.
Presentation of the PROTECO TX433405 Remote Control
Update: This model is now OUT OF PRODUCTION. We now deliver the compatible model JANE J-F4. You must have a functioning original remote control to perform the programming.
The PROTECO TX433405 remote control will soon hold no secrets for you. With this device, control your automation, whether it’s your garage door or your entrance gate. Operating at a frequency of 433.92 MHz, the coding of this white box is done via mini-switches.
Usable at all times
Easy to handle, the PROTECO TX433405 remote control has three buttons, in white, usable to configure three different channels. Powered by 12V batteries, the PROTECO TX433405 remote control can be used at any moment in your daily life.
Guaranteed Ergonomics
Ergonomic, the three switches on your PROTECO TX433405 remote control are easy to operate and simple to handle. Ideal for use in the comfort of your home.
Make your purchase with peace of mind thanks to the one-year warranty offered by Alloremotecontrol to its customers on all its products. Even better, why not opt for a second year of additional warranty when finalizing your order? (See T&Cs.)
Compatibility of the PROTECO TX433405 Remote Control
This remote control is compatible with the Jane J-F 4 button remote control model, available here.
Programming the PROTECO TX433405 Remote Control
How to program this remote control with a radio receiver?
Open the box of your radio receiver (located at the end of the antenna wire)
Briefly press the programming button on the radio receiver board. Depending on the models, it may be the button: ENR or PROG or MEMO or REC, etc… *
A diode on the radio board should now light up or blink.
Press the button on your new remote control for one to two seconds.
Release the switch. Depending on the model, the indicator on the radio board may turn off immediately or within 10 seconds after programming
You can now check the proper functioning of your remote control and close the radio receiver.
For more information, please consult the PDF manual here
*Note: Depending on the receivers, there are two methods:
– you need to press the programming button once and release it
or
– You need to hold the programming button down
FAQ for the PROTECO TX433405 Remote Control
What are the key features of this remote control?
Measuring 68 mm in length and 40 mm in width, this fob can easily fit in your pocket or handbag thanks to its slim thickness of 16 mm. Its three buttons allow you to configure three different channels to maximize the capabilities of the remote control.
What is the coding system of this remote control?
The coding system used for this remote control is a fixed code system, via mini-switches. You need to recreate the sequence of your old remote control on your new one to ensure maximum compatibility.
The Alloremotecontrol Commitment for Your Remote Control Purchase
If you wish to acquire this modern and sleek remote control, simply place an order on our site. Your package will be shipped within 24 hours, allowing for faster delivery. Additionally, we offer a 1-year warranty on this product and all accessories available on our site. We invite you to explore our site: a wide selection of remote controls and accessories for your motors awaits you. For any order placed on our site, delivery is free for two remote controls or more. For more information, feel free to consult our T&Cs.
Fast delivery !
Batteries* and instructions included
Technical service at your service
14 days to change your mind
