Presentation of the PROEM MMS backup memory module The memory module is essential: it is thanks to it that all remote controls can be programmed and saved in the receiver. The PROEM MMS memory module is not heavy, it only weighs 200g, which will have no consequences for your PROEM MCR2C4F receiver. It can record more than 500 user codes on the PROEM MCR2C4F mini control unit. This memory module is located in the electronic card of your receiver: this same receiver is located in the case of your PROEM MCR2C4F mini control unit. The PROEM MCR2C4F CPU and PROEM MMS memory module are designed by PRO EM, a manufacturer of security systems and accessories for access control systems, garage doors, shutters or blinds. To properly use your mini power station, you will need a master transmitter, a 2-channel transmitter or a 3-channel transmitter. Compatible only with the PROEM MCR2C4F mini control unit The PROEM MMS memory module has been designed to store the remote control codes for your motorization. This will only be compatible with the PROEM MCR2C4F mini central unit. The PROEM MCR2C4F radio control unit is a 2 relay control unit that can store over 500 user codes in its memory. You can operate and manage small power plants by connecting it to a computer. This control unit will serve as a receiver, which is essential for radio transmission between the remote control and the engine. Without this receiver, transmission will fail and motorized control will not be possible. This control unit can store up to 507 codes and its switchable power is 24 VA. It has 2 relays and its maximum voltage does not exceed 60V. Its IP40 protection rating makes it suitable for indoor and outdoor use. It can work in a temperature range of -10°C to 55°C. However, please choose a sheltered location during installation and avoid placing the device in direct sunlight. If you cannot shelter it, it is recommended to integrate the receiver into an IP54 enclosure to improve security. Memorizing the master transmitter Thanks to the PROEM MMS backup module, you can save and keep your remote control codes on your receiver. Your backup memory will allow you to memorize up to 7 master transmitters on your receiver. For more information regarding the procedure for memorizing a master transmitter, remember to consult the instructions for the MCR2C4F mini control unit or that for the PROEM MMS memory module. How to import memory from your memory module? To import the memory of your memory module, you will need to insert your PROEM MMS memory module into the receiver while respecting the connection direction of your module. When transferring memory, remember to connect the cables correctly before switching on the power. How to copy memory from a receiver to a memory card? In order to be able to manage the transmitter without traveling to the site, the receiver’s memory must be copied to another receiver or memory card. For more information, do not hesitate to consult the instructions. Why buy the PROEM MMS backup memory module on alloremotecontrol.com? With alloremotecontrol, your order will be shipped the same day. A one-year warranty will be offered to you (and can be extended for an additional year – see our T&Cs). The manual is available in PDF format and video. You can benefit from telephone or email support 5 days a week. Allo Remotecontrol.com also offers a one-year warranty to its customers, allowing you to buy with confidence. Even better, why not choose an additional second year of warranty when ordering? (See T&Cs)