Presentation of CAME DELTA-SE photocells The Italian manufacturer CAME offers you a flagship model in terms of safety: CAME DELTA-SE photocells. These photocells are powered by a current of 12/24 Volts and thanks to their synchronized infrared rays, they can eliminate any external interference of the signal, according to information provided by CAME. A range of 20 meters Exposed photocells to be installed on a wall, this CAME model has an infrared ray with a range of 20 meters. This way, you will be able to prevent obstacles in the path of your motorization from a long distance, whether it is a child, a football or any other obstacle. To withstand multiple atmospheric conditions, these photocells have been tested multiple times to ensure optimal use. As a result, they are classified with an IP54 protection rating. That is to say, CAME DELTA-SE photocells are protected against dust, as well as water splashes in all directions. In addition, this product can be installed in various environments, the operating temperature of the photocells then extends from -20°C to 55°C. Design of CAME DELTA-SE photocells Similar to a cube, the design of CAME DELTA-SE, disposable on wall, will blend seamlessly into your outdoor environment. With their dimensions of 70 mm high, 70 mm wide and 36 mm thick, these CAME DELTA-E photocells are ideal. In addition, the black color which coats them makes their discretion certain. A set of photocells, how does it work? Photocells protect your engine from shocks through several distinct steps: To begin, the emitting cell sends an infrared light beam to the receiver at all times. Then, when this beam is no longer received by the receiving cell, this indicates that an obstacle is located across the closure of your gate. Subsequently, the receiving cell then sends a signal to your engine. Eventually, the system will stop and block the gate from closing until you remove the obstacle in the way. Your safety is therefore ensured thanks to the photocell system. To protect your multiple systems from any shocks, this set of photocells will allow you not to worry. Any passage of children, animals or any other object located in the path will be notified. This way, you will no longer have any stress if there is activity around your engine. Detail of CAME DELTA-SE photocells: By purchasing CAME DELTA-SE photocells, you acquire: The base of the box The base of the box with application of the PG7 cable gland also a base for recessed fixing The cover of the box An electronic card then a screw for fixing the card then a screw* OR (O-ring) for fixing the base A screw for fixing the cover *The manufacturer specifies that the screws marked with this asterisk are not supplied as part of the CAME DELTA model -SE. They must be chosen according to the type of fixing (max. ø 4 mm). Compatibility of CAME DELTA-SE In the user manual of this product, the CAME brand indicates that these photocells are: Compatible with the CAME DIR series Installation of your CAME DELTA-SE photocells How to install CAME DELTA-SE photocells: For more information on the installation of your CAME DELTA-SE photocells, we invite you to read the PDF instructions for this product by clicking here. First, attach the photocells at a height from the ground of approximately 50 cm. The photocells must be facing each other. Next, drill the rear side of the bases of housing 1 to pass the cables, and secure the bases using the O-rings provided. Then, fix the TX and RX cards using the screws provided and connect them as indicated in the diagrams in the accessory instructions. Finally, close the bases using the screw by fixing and rotating the front part up and down. CAME DELTA-SE photocell FAQ Where can I find other CAME brand products? You can find other CAME brand products, whether remote controls, receivers, code keypads, on the Allo Remotecontrol website by clicking on the link here. Why buy this product on Allo Remote Control? First, your order is shipped the same day Then the 1-year warranty is offered (possible extension up to 2 years – see T&Cs) Finally, telephone assistance (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) is available 5 days a week