Presentation of CAME DELTA-E photocells The Italian manufacturer CAME provides you with the set of CAME DELTA-E photocells. A new version of photocells Powered by a current of 12 or 24 Volts, this set of CAME DELTA-E photocells is the essential accessory for your home to provide maximum security for your various engines. This set of photocells replaces those with the DOC reference. They are therefore compatible. A credo: protection and performance The infrared ray of this set of CAME DELTA-E photocells has a range of up to 20 meters. In addition, these photocells can withstand all atmospheric conditions thanks to their IP 54 protection rating. Thus, CAME DELTA-E photocells will be protected against dust. Finally, these photocells are protected against water splashes in all directions. Have no more fear by trusting this product! A set of photocells, how does it work? Thanks to the infrared technology that accompanies these CAME DELTA-E photocells, your motorization systems will be protected. To begin, the transmitter cell sends an infrared light beam to the receiver at all times. Then, when this beam is no longer received by the receiving cell, this indicates that an obstacle is located across the closure of your gate. Subsequently, the receiving cell then sends a signal to your engine. Eventually, the system will stop and block the gate from closing until you remove the obstacle in the way. Your safety is therefore ensured thanks to the photocell system. To protect your multiple systems from any shocks, this set of photocells will allow you not to worry. Any passage of children, animals or any other objects located in the passage will be notified. This way, you will no longer have any stress if there is activity around your engine. Design of CAME DELTA-E photocells Almost cubic in shape, these photocells, disposable on wall, will blend seamlessly into your environment. Measuring 70 mm in height, 36 mm in width and 70 mm in height, these CAME DELTA-E photocells will not stand out in your environment. Particularly thanks to its black color giving them an assured sobriety. Installation of your CAME DELTA-E photocells Attention: It is preferable to call a professional to install these photocells. Improper installation of this device may be dangerous. Before proceeding with the installation, you must: Ensure that the line voltage is connected. Check if the place where the device will be fixed is in an area protected from shocks, if the anchoring surfaces are solid. Ensure that the fixing is carried out with the appropriate elements (screws, dowels, etc.) for the surface area. Prepare appropriate conduits and moldings for the passage of electrical cables. How to install CAME DELTA-E photocells: For more information on the installation of your CAME DELTA-E photocells, we invite you to consult the PDF instructions for this product by clicking here. Fix the photocells at a height from the ground of approximately 50 cm. The photocells must be facing each other. Drill the rear side of the bases of box 1 to pass the cables, and secure the bases using the O-rings provided. Secure the TX and RX cards using the screws provided and connect them as indicated in the diagrams in the accessory manual. To conclude, close the bases using the screw by fixing and rotating the front part up and down. CAME DELTA-E photocell FAQ Where can I find other CAME brand products? You can find other CAME brand products, whether remote controls, receivers, code keypads, on the Allo Remotecontrol website by clicking on the link here.