BFT AKTA A30 photocells: a guarantee of safety These photocells have been designed to allow you maximum safety when using your motors: thus, if you close your gate or garage door and you do not have noticed that an obstacle is hindering the closing of the latter, the BFT AKTA A30 photocells are there for you. They will transmit the signal to your motor, which will automatically stop the mechanism. This system is a real guarantee of safety for you, your objects, and your motor system. Once you have correctly aligned your cells during their installation, they will be able to detect any obstacle that is too bulky on the closing path of your motors, thus avoiding shocks and impacts. The BFT company at the service of your security The BFT company has been in full expansion for several years. The reason is as follows: BFT is committed to producing quality products and accessories for your motorization systems. BFT photoelectric cells, in addition to being completely secure systems, are also stylish and original. The photoelectric photocell system All operation and detection of obstacles is based on infrared emissions: your photoelectric cells are designed in pairs, a transmitter cell and a receiver: the transmitter cell will emit a light beam to the receiver cell. If this beam disappears, it is a sign that an obstacle is hindering the closing of your motorization system: your motorization will then be stopped by the photoelectric cells. Technical characteristics of BFT AKTA A30 photoelectric cells BFT AKTA A30 photocells are cells that can be rotated 180° horizontally and 20° vertically. They are ideal for outdoor use in order to better detect obstacles on your gates or garage doors. They operate at a range of 30m and require a 24 VAC/DC power supply. If you want to install your cells on PHP type columns, you will need to provide a PHP ADA adapter. Their installation is renowned for being simple and quick. Concerning the contact range, it is 30V. To connect the contacts, we advise you to carefully observe the diagrams provided in the instructions. If you observe any malfunctions, it could be due to interference caused by the presence of other infrared emissions near your photocells. BFT AKTA A30 photoelectric cells are made up of a housing entirely designed for outdoor use: as a result, it is resistant to splashing water and dust (thanks to an IP45 protection index). Your photocells will also be able to withstand high temperatures (up to 55°C) and very low temperatures (-20°C). Please note, even if the range can reach 30m, it can be significantly reduced in the event of snow, fog or rain. They are also very space-saving and have adequate dimensions for optimized discretion (130 x 45 x 43 mm). Installation of BFT AKTA A30 photocells To install your BFT AKTA A30 photocells, nothing could be simpler: you just need to screw in the support with screws. However, we strongly advise you to carefully read the instructions, available in PDF and provided with your product when you order. If you want to ensure the correct alignment of your cells, you will need to check that your motor reacts when an obstacle is on the infrared beam of your photocells. If so, it means your alignment was done correctly. Order your BFT AKTA A30 photocells now on Allo Remotecontrol BFT AKTA A30 photocells are available now on Allo Remotecontrol. If you order today, your delivery will be dispatched within 24 hours, so don’t hesitate! If you want to protect your BFT motor systems as much as possible, these photocells will be a real asset. You can contact us at any time for more information on this product, we will be there to answer all your questions.