Presentation of the DOITRAND TX4DE remote control DOITRAND offers a new reference on Allo Remote Control, the DOITRAND TX4DE remote control which can be used to control garage doors. The French company, with its many qualified staff members, has in fact created a successor to the DOITRAND TS2DE V.2. A transmitter with a very good radio signal Coded on a frequency of 433 MHz – which gives it an excellent signal range – this remote control has simplified programming. This is done thanks to the mini-switches, located on the back of this transmitter which are commonly called “dip-switches” (see dedicated paragraph on programming below). Thanks to the DOITRAND TX4DE model, powered by a 3 V battery, type CR2032, you can control up to four different automations or assign four different commands. With the four white buttons adorning this transmitter, opening and closing your garage door will be child’s play. Maximum ergonomics With its 65 mm height and 30 mm length, you will have no excuse not to have your favorite remote control with you everywhere. In addition, DOITRAND has thought of you by leaving a small space on the lower part, perfect for slipping in a key ring. In this way, the risk of getting lost is minimal. Also, to indicate to you that an action for your garage door has been carried out, DOITRAND has slipped an LED into the upper left part which flashes red. You will therefore not need to press the button in question again to ensure that the opening or closing operation has been carried out. A refined item Elegance has also been maximized for this DOITRAND TX4DE. The steel-colored edges contrast discreetly with the center, which is gray in color. Also, the white buttons are easy to spot and are more discreet in size when you look at those located in the lower part. These can be used with light pressure and can even be used if you are wearing gloves. You will have understood, this device is 100% practical! Compatibility of the DOITRAND TX4DE remote control The manufacturer informs that this product is compatible: with DOITRAND receivers produced since 2018, because recording the remote control may be possible on the radio receiver. but also with installations before 2018, when you use the mini-switches (also called Dip-switches) on the back of the remote control. Note: In the case of DOITRAND receivers since 2018, the installer may have to carry out additional manipulations to configure it. Programming the DOITRAND TX4DE remote control According to the information provided by the manufacturer, this product is programmable using the switches located on the back of it. To do this: Open the rear flap of your remote control (as in figure 1 of the instructions available here) Then, move the DP1 cursors (see figure 2), according to the code assigned by the administrator members of the housing collective. Other operations on this remote control are possible. To find out more, please click on the notice here. Also note that this product: is compatible with DOITRAND receivers, from 2018. However, you must register the remote control on the radio receiver. is also compatible with installations before 2018. To do this, position the mini switches, present on the back of the remote control, as they are on your other remote control. DOITRAND TX4DE remote control FAQ Can you tell me more about the DOITRAND brand? Founded in 1977, the French company DOITRAND specializes in the design of motorization systems. In addition, whether it is motorized doors, fences, automatic barriers and gate remote controls, this company promotes practicality and improving the comfort of daily life. Finally, the brand’s products are mainly used by customers living in condominiums or subdivisions. Where can I find other DOITRAND brand products? You can find a multitude of products from the French brand on the Allo Remotecontrol website, by clicking here. Why buy this product on Allo Remote Control? First, your order is shipped the same day Then the 1-year warranty is offered (possible extension up to 2 years – see T&Cs) Finally, telephone assistance (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) is available 5 days a week