Presentation of the PROEM MCR2C4F mini control unit The PROEM MCR2C4F radio control unit is a 2 relay control unit, which can contain, in its memory, more than 500 user codes. You can operate and manage your mini central by connecting it to your computer. This mini control unit will play the role of receiver, which will be necessary for radio transmission between your remote control and your engine. Without this receiver, the transmission would fail, and your engine could not be controlled. The PROEM MCR2C4F mini control unit was designed by PRO EM, a manufacturer of security systems and accessories for gate motorization, garage doors, shutters, or blinds. In order to operate the control unit correctly, you will need a master transmitter, a 2-channel transmitter, or a 3-channel transmitter. Compatibility of the PROEM MCR2C4F receiver The transmitters compatible with the PROEM MCR2C4F mini control unit are as follows: AM/ASK version: all ER2C4A, ER4C4A, ER2C4AM type transmitters FM/FSK version: all ER2C4F, ER4C4F and ER2C4FM type transmitters Design La mini central MCR2C4F comes in the form of a box including a backlit LCD screen with 2 lines of 16 characters: this screen will allow messages to be displayed. These messages can tell you about problems encountered or system errors. For example, the screen can tell you if the received signal is too weak or unreadable. This central unit is modern and connected: you can connect it to your computer to configure and operate it. The PROEM MCR2C4F mini power station is not heavy or bulky: it has dimensions of 180 x 140 x 68mm and weighs 330g. It will therefore be convenient to install and dismantle. Technical characteristics of the PROEM MCR2C4F mini central unit This central unit can memorize up to 507 codes and its switchable power is 24 VA. It is equipped with 2 relays, which will not exceed the maximum voltage of 60V. Its IP40 protection rating allows it to be used indoors and outdoors: it can operate at temperatures ranging from -10°C to 55°C. However, choose a rather sheltered location during installation, and avoid leaving your power plant in direct sunlight. If you cannot place it sheltered, it is recommended to integrate this receiver into an IP54 enclosure for greater security. The PROEM MCR2C4F mini central unit is also equipped with two security systems: The radio system: this system allows you to operate your motor on a frequency band of 433.420 MHz, which is perfectly compliant with European standards with regard to radio transmissions (CE). The Rolling Code system or rotating code: this system guarantees you optimal security as well as inviolability of the transmission. The code transmitted between the receiver and the transmitter being unique for each transmission and recognized only by the receiver, it then becomes impossible to force the system. This technology is based on a very complex algorithm Installation Remember to choose the installation location carefully, as this will be decisive for the proper functioning of your plant. To do this, you must place your receiver far from your computers, your alarm systems, and any radio broadcasts. The distance between the PROEM MCR2C4F control unit and any other receiver must be at least 1.50m. Once this step has been completed, you can move on to installation: Lay your receiver flat: open it and remove the breakable parts using the screwdriver. These parts are located at the back of your receiver Drill the mounting holes Place the plugs Drill the grommets used Pass the cables through the grommets Why buy the PROEM MCR2C4F mini radio control unit on alloremotecontrol.com? Your order is shipped the same day The test batteries are free A 1-year warranty is offered to you (with a possible extension of 1 additional year – see T&Cs) The instructions are at your disposal (in PDF and in video) Our telephone or e-mail assistance is available for you 5 days a week Make your purchase with complete peace of mind thanks to the one-year warranty offered by Allo Remotecontrol.com to its customers on all its products. Better yet, why not opt for an additional second year of warranty when placing your order? (See T&Cs)