Introducing the Marantec Digital 506-868 Remote Control This Marantec gate and garage door remote control is a 10 channel transmitter designed in the form of a remote control. It is equipped with a Rolling code coding function: this function allows your system to be protected from hacking or hacking of your motorization system. Thanks to the rolling code system, a reduction in thefts and burglaries has been noted among users of motor systems with the rolling code function. In addition, with the Marantec Digital 506-868 remote control, you will be able to control up to 10 automations in your home or residence, which is quite significant if you have many automations. You will be able to operate these same automations more than 35m away in open fields, which gives you the opportunity to control your gates and garage doors from your vehicle, your garden, or your street. How to maintain the maximum range of your Marantec Digital 506-868 remote control The Marantec Digital 506-868 remote control has an approximate range of 35m in open air. However, this range can be altered by the presence of a steel or concrete wall, or by the presence of a tree: these obstacles could limit the range, or even completely jam the signal. If you want to optimize the range, you can equip yourself with a bi-linked antenna operating at the same frequency as your accessories: if you opt for the Marantec Digital 506-868 remote control, you will need to equip yourself with an antenna operating at 868.300 MHz. The bi-linked antenna can take care of optimizing the radio signal between your transmitter and your receiver. Characteristics of the Marantec Digital 506-868 remote control: the bi-linked system The bi-linked system has become the new radio standard from Marantec: it guarantees more security thanks to encrypted radio transmission. This radio standard allows improved communication between the transmitter and receiver thanks to bi-directional transmission channels. In addition, new bi-linked accessories have emerged since the creation of the bi-linked system, which has enabled the design of new, safer and more reliable control systems. These control systems are now based on LED displays, which will allow you to know the status of your motorized doors in real time. The Marantec Digital 506-868 remote control operates at a frequency of 868.300 MHz. Its coding is based on the principle of Rolling code, which is a security system very renowned for its protection against forcing attempts. This remote control is larger than a gate beep, but it will give you many additional features, including the possibility of pairing it with no less than 10 automations. The Marantec Digital 506-868 remote control is available in gray color. The dimensions of the Marantec Digital 506-868 remote control are approximately 110 x 38 x 14 mm. Its main advantage lies in its lightness: it is a very malleable remote control which will offer you exceptionally comfortable control. In addition, this lightness will allow you to carry your remote control everywhere with you. How to easily program the Marantec Digital 506-868 remote control? You have two different ways to program the Marantec Digital 506-868: Either from your old working remote control Or from your receiver To program your Marantec Digital 506-868 remote control from your receiver, you will need to follow the following instructions: Open the case of your radio receiver then locate the learning button on the card of your receiver Press the learning button for 2 seconds: an LED should flash or light up: this indicates that your receiver has gone into learning mode Then press the button/channel of your remote control that you wish to connect to the control of your automation: keep pressed for at least 3 seconds Your Marantec Digital 506-868 remote control is programmed and ready for use.