Presentation of the MARANTEC D526-868 digital code This digital code has been designed to simplify all your daily automation control actions. You can dial up to 3 different codes on the 3 available channels. It will be compatible with all MARANTEC operators operating at the same frequency, i.e. 868Mhz, but be careful: if you benefit from a Comfort type motor (such as the 260, 270, 280, 360, 370, 380 systems), It is essential that you equip yourself with a Digital 921 antenna, reference MA101180, otherwise, your engine will not be compatible with bi-linked technology. The frequency is identifiable in the case of your receiver, on the quartz. The frequency is always represented in “Mhz”: if you find numbers without the “Mhz” sign, this will not be the frequency. This digital code also allows you to control lighting systems, if it is connected to a universal receiver, or to the operator. To program this function, take your instructions with you, where all the steps will be detailed. Technical characteristics of the MARANTEC D526-868 digital code This type of digital code will operate at a frequency of 868Mhz using 1.5 V AAA batteries. Its case is elegant and sliding, and will be protected from jets of water and foreign bodies, thanks to in particular its IP54 protection index. You can use it between -20°C and 60°C; beyond that, it could seriously compromise its capabilities. Closed, its dimensions are around 81 x 118 x 35mm, which promises you a space-saving and practical accessory. It is best to attach it to a wall, for greater comfort. Thanks to its sliding box, you can protect it from external attacks, or prevent other people from being able to control your motors. The keys on your code keypad will be illuminated for greater comfort and visibility, and the LEDs on your digital code will allow you to know the status or position of your motorization. The MARANTEC D526-868 digital code is equipped with the powerful bi-linked system, which will optimize the comfort and security of your digital code and your motorization system. LED displays The status of the LEDs is important for programming. If the code registration failed, the LEDs flash for 2 seconds. Depending on the flashing, the red LEDs will indicate an error, or on the contrary, the success of the procedure. First programming Your first master PIN is the following: “0000”: it resets automatically after resetting the digital code. The memory will only be able to store 3 PINs. If you enter the PIN with more than 4 digits, your MARANTEC D526-868 digital code will only remember the last 4 digits. In order to dial your first PIN, please follow the following instructions: 1st step: Start by setting your operator, your control or your receiver to programming mode by radio signal: if this step is correctly carried out, the “radio” logo should flash on your operator, or your command 2nd step: You can now enter the 4-digit PIN code of your choice. This PIN code will be the master PIN of your digital code: then confirm with the “Enter” key 3rd step: Enter another 4-digit user PIN code and confirm again with the “Enter” key. Step 4: Your master and user PIN codes have been successfully saved. 5th step: To complete the programming, do not forget to deactivate the radio logo on your operator or your control During programming of the codes, the LEDs will indicate the status of the procedure: a legend is available on the instructions. your digital code, this will help you to know the advances in programming. Please note: If you order the MARANTEC D526-868 digital code, your order will be shipped today. We work with the best logistics platforms to provide you with delivery as quickly as possible.