Presentation of the MARANTEC D343,2-868 universal receiver This receiver has been designed to control MARANTEC gate motors, but not only that: in fact, it can also control motors from several other manufacturers. To be compatible with your receiver, your motor must be able to operate at a frequency of 868 MHz. For example, this receiver will be compatible with the following MARANTEC operators: Comfort 260 Comfort 270 Comfort 280 Comfort 360 Comfort 370 Comfort 380 This receiver was designed by the famous MARANTEC brand, which continues, even today, to make its evidence in the world of motorization systems. Relying on safe materials and unique professionalism, the MARANTEC brand is committed to providing you with reliable and durable products. The MARANTEC D343.2 models are available in two frequencies: in 868 MHz: the MARANTEC D343.2-868 receiver and in 433 MHz: the MARANTEC D343.2-433 receiver. Composition The MARANTEC D343.2-868 universal receiver is equipped with the best security systems available. It is equipped with the multi-bit system, which is a unidirectional radio system, specially developed for automation. The transmitter signal is sent via a secure 48-bit coding system. It uses around 70 million transmission codes, which guarantees you excellent security. Each operator provides its own unique and unclonable code. The MARANTEC D343,2-868 receiver is a 2-channel receiver: each of its channels will receive the coding of a different transmitter, which means that you can program up to two transmitters on this receiver. You can, if you wish, connect a pulse button to each of its channels which will encourage the switching of the corresponding relay. To connect this impulse button, you will need to use the connection cable supplied with your receiver. You can fix your receiver on a wall: it must be as flat as possible. To do this, you will need to connect relay channel 1 to contactor NO1-COM1 and relay 2 to contactor NO2-COM2. Technical characteristics of the MARANTEC D343,2-868 receiver This receiver can be quickly and easily tuned to your motor: to do so, simply plug in the connection cable: the power supply voltage is 12/24V, in direct current or alternating current, and has a frequency of 868 MHz. This receiver will be discreet with dimensions of 66 × 62 × 31 mm. It is not recommended to install your MARANTEC D343,2-868 universal receiver outside: in fact, its IP20 casing will not be enough to protect it from rain: however it will be protected from foreign bodies. If you want to add additional protection to your case, you can purchase a compatible protective case with a higher protection rating. You will be able to operate your universal receiver at temperatures between -20°C and 60°C; beyond these temperatures, your receiver could be damaged. The ideal would be to install it in a sheltered location, which is not subject to significant temperature variations. Erasing the memory If you wish to reset your transmitter codes, it is possible: however, you will have to erase the contents of each channel one after the other. To do this, you will need to carry out the following operations: 1st step: Hold down the TA1 button (corresponding to channel 1) 2nd step: The LED should flash after 3 seconds 3rd step: If the indicator light is on, this means that all the codes transmitter on the channel have been deleted 4th step: You can now release the button The MARANTEC D343,2-868 receiver on Allo Remotecontrol If you wish to purchase this model today, your order will be shipped in less than 24 hours. You can also obtain MARANTEC D302-868 MARANTEC D304-868 MARANTEC D321-868 compatible transmitters on our site. Your receiver will be able to register up to two transmitters, which means you can get two of your choice. But that’s not all: thanks to Allo Remotecontrol, for the purchase of two or more remote controls, benefit from free delivery!