Presentation of the MARANTEC D339.2-433 receiver Thanks to its unique know-how, the MARANTEC company has become a reference in home automation and products and accessories for your automations. MARANTEC products are designed to satisfy your needs, by offering you quality and durable products. These products all meet the European R&TTE directive 1995/5/EC. It can be consulted at any time from your MARANTEC manufacturer. The MARANTEC D339.2-433 receiver is equipped with 1 channel: this is responsible for receiving the transmitter code. If necessary, a pulse key can be connected to the channel: this pulse key will switch the relay corresponding to the selected operating mode. To connect the pulse button, you will need the connection cable, supplied with the receiver. Two models available The MARANTEC D339.2 receiver is available in two frequencies: the MARANTEC D339.2-433 universal receiver, operating at a frequency of 433Mhz, and the MARANTEC D339.2-868 receiver, operating at a frequency of 868Mhz. Your MARANTEC D339.2-433 receiver is compatible with MARANTEC transmitters operating at the same frequency as it, i.e. at a frequency of 433Mhz. Check the frequencies carefully to ensure optimal compatibility between your receiver and transmitter. The transmitters compatible with your MARANTEC D339.2-433 receiver are as follows: MARANTEC D321-433 MARANTEC D304-433 MARANTEC D302-433 MARANTEC D313-433 Technical characteristics of the MARANTEC D339.2-433 receiver The MARANTEC D339.2- universal receiver 433 has 1 channel and can be adjusted on the motor using the connection cable: the supply voltage (direct or alternating) of the MARANTEC D339.2-433 receiver is 12/24V. Its dimensions are approximately 66 x 62 x 31 mm. Thanks to the IP20 protection index, your receiver will be protected from the intrusion of solids. You can use the MARANTEC D339.2-433 receiver at temperatures between -20 ° C and 60 ° C. Programming the MARANTEC D339.2-433 receiver With this receiver, programming becomes quick and easy: if your gate or door garage provides a voltage of 12/24 Vac/Dc, it will be compatible with this receiver whatever its brand. To register a new transmitter code, the process will be done in a few quick steps: 1st step: Open the shell of the box 2nd step: Press the TA1 key and keep it pressed for approximately 3 seconds 3rd step: During 10 seconds following the operation, press any button on your transmitter 4th step: The LED turns on and off when releasing the button on your transmitter: this indicates that your transmitter has been successfully registered 5th step: N’ don’t forget to close the case shell If you would like more details on recording the transmitter code, do not hesitate to consult the instructions supplied with your receiver. If you are unable to find the necessary information, do not hesitate to contact us, we will answer all your questions. Clearing the transmitter memory The transmitter memory stored in the receiver can be deleted. To do this, carefully follow the steps below: 1st step: Hold down the TA1 button (corresponding to channel 1) 2nd step: The LED should flash after 3 seconds 3rd step: If the LED is on, this means that all transmitter codes on the channel have been deleted 4th step: You can now release the button Free delivery with the purchase of two remote controls! On Allo Remotecontrol, we offer you the option of not paying for delivery: to benefit from free delivery, you will need to order at least two remote controls. But that’s not all: Allo Remotecontrol offers you a one-year warranty, and, if you wish, you can extend this warranty period to an additional year.