Presentation of the Marantec Comfort 260 bi-linked 550N kit The Marantec Comfort 260 bi-linked 550N kit is ideal if you want to quickly motorize your opening systems such as your gate or garage door. This kit is complete since it will provide you with: A motor to motorize your gates and garage doors: the Marantec Comfort 260 bi-linked 550N motor A digital antenna which will optimize the radio signal between your remote controls and your receiver Two remote controls with a frequency of 868Mhz each: MARANTEC Digital 572 remote controls A universal mounting kit to facilitate the installation of your motorization A power cable 1.50 meters long All these accessories will be within your reach thanks to this kit. You will no longer need to look for accessories compatible with your engine. In addition, all the accessories included in the Marantec Comfort 260 bi-linked 550N kit are all compatible with each other. The Marantec Comfort 260 bi-linked 550N motor The major asset of this kit is the motor: it is equipped with bi-linked radio technology, which means that it can be controlled by pressing the buttons. This way, opening and closing your gates and garage doors is a simple press of the buttons on your remote control. In addition, this technology will provide your motorization system with maximum safety. Bi-linked radio technology offers you the possibility of checking the status of your gate or garage door in real time using LEDs: they will tell you whether the door is open or closed. The Marantec Comfort 260 bi-linked 550N motor will be used to motorize all types of overhanging, sectional, hinged or side sliding doors from 3500mm to 5000mm wide. It also has a maneuvering speed of 160nm per second and an opening time of 14 seconds on average (this opening time differs depending on the type of door). This motor can also be used to motorize insulated sectional garage doors up to 3000mm. This motor also has an energy saver: a sleep mode is available to reduce costs and energy impacts. In addition, you will benefit from extremely effective anti-burglary security. The bi-directional Digital 921 antenna The Marantec Comfort 260 bi-linked 550N kit also has a bi-directional antenna with a frequency of 868 MHz. With this antenna you can easily make the Comfort 260 motor compatible with the rest of your 868 Mhz frequency accessories. The antenna will be used to limit radio interference and increase the range of your accessories, such as your remote controls or switches. 2 MARANTEC Digital 572 remote controls included in the kit This MARANTEC remote control has bi-linked technology: it will send orders to open and close your doors at the simple press of a button. This remote control will be able to communicate with you in real time thanks to the status button and the LED display: you will be able to know if the door is open or closed. They both operate at a frequency of 868 MHz and must be powered by 3V CR2032 batteries. They will each be able to control 2 swing doors and 868 MHz frequency receivers equipped with bi-linked technology. Order your kit without further delay on Allo Remotecontrol You can now order the Marantec Comfort 260 bi-linked 550N kit on Allo Remotecontrol. This kit will give you all the accessories you need to motorize your gate or garage door. We invite you to browse all our motorization kits for your gates and garage doors. Our kits are complete and will give you the opportunity to save time when shopping. This is an ideal solution if you want to motorize your doors without having to look for all the accessories that are compatible and useful for your motorization project.