Presentation of the PROEM KITMCR2C cable kit This cable kit is reserved for MCR2C4F control units: these control units will allow you to operate the opening and closing mechanism of your PROEM automations, using a transmitter. These are central units with 2 relays which act as receivers, with a switchable power of approximately 24 VA. These power plants will be able to operate at temperatures ranging from -10°C to 55°C. They are equipped with the Rolling code system, a powerful and efficient security system. Thanks to these central units, you can, using cables, transfer programming between 2 MCR2C4F central units, connect your central unit to your transmitter, or connect your central unit to a printer. Their 16×2 character backlit LCD screen will allow you to follow the programming and memory transfer steps when connecting your cables. He will be there to tell you the progress of the procedures and to point out any problems during the process. Composition of the PROEM KITMCR2C cable kit This kit is made up of 3 cables designed for your MCR2C4F control units: A connection cable between the control unit and the transmitter A connection cable between 2 control units to transfer programming A connection cable to a serial printer, a PC, or a terminal device The central/transmitter connection cable This cable will allow you to connect your central unit to your transmitter, in order to be able to transfer the Serial number from your old transmitter to your new one. The transmitters compatible with the PROEM MCR2C4F control unit are the ER2C4A, ER4C4A, ER2C4AM, ER2C4F, ER4C4F and ER2C4FM transmitters. For the MCR2C4F800 and MCR2C4F800PC control units, the compatible transmitters will be the ER2C4F, ER4C4F, ER2C4FM, ME2C4F and CR4F transmitters. For this procedure, you will need the connection cable (this is the first black cable, the one that is equipped with the backup module that connects to your transmitter). To program, you will need to select the “transfer to transmitter” menu, then enter the serial number you want, then confirm. If the message “prog transmitter connected” appears, you can proceed to connecting your cable. To do this, open the battery door of your transmitter and connect the probe of lead B to the 7-pole connector located on the back of your transmitter. Then confirm using the “right” key on your transmitter: a connection check will then begin, which will result in the following message: “Update OK”. The cable for transferring programming between 2 central units You can copy and transfer the entire memory of your previous central unit into the memory of another central unit using the second black cable (equipped with RJ11 connectors). These connectors must be connected to the corresponding connectors present in your 2 control units. Your receiver will perform a test to check the memory of your control units. Simply give confirmation using the right button on your master transmitter: the transfer will delete the memory on your old receiver to transfer it to the new one. If the following message appears: “Update OK”, this means that your memory has been successfully transferred. The cable for connecting to a printer This cable will connect your control unit to a printer, a computer or a terminal device. It is white in color. For this step, we advise you to follow the instructions illustrated by diagrams: these instructions are provided to you when you purchase your control unit. You can also find it on the official PROEM website The PROEM KITMCR2C cable kit on Allo Remotecontrol.com This cable kit will be an asset for the use of your MCR2C4 control units: with Allo Remotecontrol.com, we will ship your order within 24 hours for that you receive it as soon as possible. We know that gate and garage door motorization accessories are essential and necessary for your daily life, which is why we offer you Online Help – FAQ to answer all your questions. If this section is insufficient, or does not provide the answers you expected, please note that it is possible to contact us free of charge by email or telephone.