Presentation of the CAME FROG FRG35K01 Kit For your swing gates, the CAME FROG FRG35K01 kit has every reason to satisfy you! This is a state-of-the-art buried kit for your double-leaf gate. This kit is intended to be used for your gate having the following weight and dimension: 800 kg and 3.50 m per leaf. The motorization of your CAME FROG FRG35K01 kit is buried, therefore invisible in your environment. Powerful gear motors With its motor powered by 230V (AC) at 50/60 Hz, the CAME FROG-AE motor offers you a power of 200 watts. Ideal for administering the power needed for your gate. It is also composed of a foundation box and a movement transmission arm. Weighing 11 kg, this motorization is protected. It has been classified with the protection index IP67. This means that this system is protected against dust and the effects of immersion. A CAME ZM3E control cabinet included With the CAME FROG FRG35K01 kit, you have at your disposal the CAME ZM3E electronic card powered by 230 V. This allows you to configure your gate as you wish, but also to make other adjustments more advanced. Two remote controls combining power and ergonomics Also included in this kit, you have two CAME TOPD4RBS remote controls. These new generation transmitters are powerful and combined with incredible ease of use. With their dual frequencies of 433.92MHz and 868.35MHz, you will be able to control gate and garage motors of these two frequencies, if they are of the same brand as this one. A chance unlike other products. Additionally, their range is 150m outdoors and 50m indoors. This way, you can use this product wherever you want, as long as you are close to your engine. Additionally, with this product you also get a CAME AF43S receiver operating on a frequency of 433.920 MHz with a 12V/24V (AC/DC) power supply. It has two channels and is perfectly usable for residential use. Guaranteed maximum reception To ensure optimal reception at all times, the CAME group provides you with a CAME TOPA433N antenna. This is functional with CAME brand receivers and remote controls with a frequency of 433.92 MHz. A secure kit For the security of your CAME FROG FRG35K01 kit, CAME DIR10 photocells have been added. With a range of 10 m, their infrared rays allow you to avoid damage or accidents to your engine. In addition, this CAME FROG FRG35K01 kit is provided with a CAME KLED flashing light, powered by 120/230 V. This device allows you to alert you, for example, if a presence is detected on the path of your gate in its phase closing. Contents of the CAME FROG FRG35K01 The CAME FROG FRG35K01 kit contains the following products: Two irreversible CAME FROG-AE gear motors Two steel foundation boxes with CAME FROG-CFN cataphoresis anti-corrosion treatment One CAME ZM3E control cabinet Unlocking device with lever key CAME A4364 Two CAME TOPD4RBS transmitters A CAME AF43S radio card A CAME TOPA433N antenna A set of CAME DIR10 photocells A 5m CAME TOP-RG58 cable for connecting the antenna A CAME KLED indicator flasher A flashing support for fixing to the CAME wall KIAROS A gate plate Complete instructions Installation of the CAME FROG FRG35K01 kit Programming of CAME FROG-AE gear motors To find out how to install CAME FROG-AE gear motors, we invite you to consult the product user manual on Allo Remote Control by clicking here Setting up the CAME ZM3E control cabinet You can find out about the different ways of programming this control cabinet by consulting the product’s PDF instructions by clicking here Programming the CAME TOPD4RBS How to program your remote control using an old remote control (in four steps): First, take your old and new remote controls. Move closer to your receiver (within a maximum distance of 5 m) Then, press the already programmed button on your old remote control for 10 seconds. Its LED should become fixed. Then, you then have 20 seconds to register the button of your choice on your new remote control by maintaining pressure on it. You can register multiple remote controls at once. Congratulations ! Your new remote control is programmed! For more information on programming your remote control, we invite you to consult the PDF product instructions on our site by clicking here Installation of the CAME AF43S radio card For more information on programming your receiver, we invite you consult the product programming instructions on our site by clicking here How to program my remote control to my receiver: First, open the radio receiver (you have to follow the antenna wire to locate it). Then press the push button on the receiver. The latter is identifiable, because it says MEMO; REC; ENR; PROG on the radio board (for some receivers, simply press the MEMO button once and release it. For others, you have to hold the MEMO button). Then, a light on the radio board lights up or flashes. Then, press the button on your remote control for a second and then release it. Then wait for the light on the radio board to go out. Finally, test the remote control and close your radio receiver. Well done ! Your remote control is now programmed. Installation of the CAME TOPA433N antenna For more information regarding the installation of this antenna, we invite you to consult the manufacturer’s instructions here Programming of CAME DIR10 photocells For more information, we invite you to consult the manufacturer’s instructions here To install your CAME DIR 10 photocells, you must: First, position them opposite each other Then, attach the photocells at a height of approximately 50 cm from the ground. Then, if necessary, plan to accommodate the base for flush-mounting and secure it. Secure the box to the wall or base using the screws provided and any dowels. Finally, select the type power supply and make the necessary connections. Warning: to remove the card, only force on the indicated side. Secure the cover. Installing the CAME KLED flashing light To install this flashing light, you must: First, plan the necessary power cables. Next, open the flashing light (A) and pierce the base from the bottom (B). Then, pass the cables coming from the cabinet through the hole and attach the flashing light base to the C pillar using the appropriate screws and anchors. Finally, connect the wires to the flashing light board and then close everything. For more information and details on the procedure to follow, you can consult the PDF instructions for use on our site by clicking here FAQ for the CAME FROG FRG35K01 kit Can you tell me more about the CAME brand? Firstly, the CAME brand is an Italian brand founded in 1970. Then, specialized in motors and automatic opening systems, the Italian firm is a must in the field of security. With receivers, remote controls and other accessories, the more than forty-year-old company is one of the leaders in the home automation market. Where can I find other CAME brand products? You can find other CAME brand products on Allo Remote Control by clicking on the link here