Presentation of the KING-GATES Fred Myo2 KIT With the KING-GATES FRED MYO2 receiver kit, control your engines as you wish. Powered by 12V/26V (AC-DC), you have the ideal tool in this kit. Indeed, with these two channels, you can control your gate or garage motors as you wish. Also, this receiver has a frequency of 433.92 MHz and has a memory capacity of 480 codes. Additionally, it is designed with monostable outputs. A protected receiver In addition, it is very solid. The KING-GATES brand engineers have done everything possible to provide you with quality equipment. Thus, it is classified with the IP54 protection index. This means that it is protected against dust and liquid splashes in all directions. Two quality remote controls included Included inside this KING-GATES Fred Myo2 kit, you have two KING-GATES MYO 4C remote controls. Designed with a frequency of 433.92 MHz, this transmitter (which can control four channels) guarantees a range of up to 100 meters. In addition, it has the “copy” function, so it can copy the code from an old remote control already programmed to your receiver. Thanks to its self-learning programming, you can record it directly in your engine’s receiver, without the intervention of a specialist! Details of the KING-GATES Fred Myo2 Kit When you buy this kit, you receive the following products in it: A KING-GATES Fred Myo 2 receiver Two KING-GATES Myo 4C gate remote controls Compatibility of the King-Gates Fred Myo2 Kit You can use this receiver with the following remote controls: KING-GATES MYO 4C remote controls KING-GATES PEN 4 type transmitters Programming the King-Gates Kit Fred Myo2 For more information on programming your receiver, we invite you to consult the instructions for this product, on the Allo Remotecontrol website by clicking here. You can also consult the instructions produced by the receiver manufacturer by clicking here. How do I program a remote control to channel 1 of this receiver? (in four steps) First, press the programming button on the receiver once. The LED on it should turn green. Then, within 5 seconds, press the button on the remote you want to program. The LED should turn off and then turn back on. Then wait 5 seconds, or press the programming button on the receiver. The LED should go out. Congratulations ! Your remote is programmed and ready to use! How do I program a remote control to channel 2 of this receiver? (in four steps) First, press the programming button on the receiver twice. Its LED should turn red. Then, within 5 seconds, press the button you want to program on the remote control. The LED should turn off and then turn back on. Then wait 5 seconds or press the programming button on the receiver. The LED should go out. Congratulations ! Your remote control is ready to use! How to program this receiver from an already programmed remote control? (in six steps) First, press the button you want to program on your new remote control. After 5 seconds, the LED on your new remote control should flash. Then, bring your new remote control closer to your already programmed remote control. Then, while holding down the button on your new remote control, you must press the same button on your already programmed remote control. The LED on your new remote control should flash quickly. Then release the buttons. Then wait 10 seconds. Congratulations ! Your new remote control is programmed! FAQ for the King-Gates Fred Myo2 Kit Why buy this product on Allo Remote Control? First, know that your satisfaction is the priority. We will handle your product with great care. Then, your order is shipped the same day. Then the 1 year warranty is offered (possible extension up to 2 years – see CGV) Finally, telephone assistance (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) available 5 days a week