Presentation of the MARANTEC COMMAND 231 433 code keyboard If you want to improve the security of your automatic doors and gates, you can go for the digital code, which will control your automations by code: unlike a basic remote control, the code keyboard will allow you to dial a security number which will unlock your motor systems. This system is very practical because it ensures better security for your automations. Thanks to the MARANTEC COMMAND 231 433 digital code, you can take control of 3 different operators. For this, each automation will be programmable by a unique code different from the others. If necessary, other equipment can be added, such as exterior lighting. For this you will need an additional receiver. To control your system, simply enter your password (PIN) and press “ENTER”. It is possible to set a temporary code if you wish to allow temporary access to certain visitors, such as maintenance workers. This code will be editable at any time, and you can set it for a limited time. MARANTEC COMMAND 231 available in 2 frequencies Please note that MARANTEC COMMAND 231 digital codes are available in two different frequencies. They are available at the frequency of 433Mhz, but also at the frequency of 868Mhz, under the MARANTEC COMMAND 231 868 model. The frequency allows the digital code to be accessible in several countries in Europe. Remember to check, when purchasing, if the frequency can be used in your country. Attributes of the MARANTEC COMMAND 231 433 code keypad For optimal operation, the MARANTEC COMMAND 231 433 code keypad preferably requires two 3V CR2032 batteries. Its frequency of 433Mhz makes it usable in many European countries. Its light weight will bring you comfort and practicality. Because the MARANTEC COMMAND 231 433 digital code is equipped with an IP54 protection rating, it is protected from splashes of dust and water. Installation and programming of the PIN(s) To install your digital code in good conditions, remember to choose a suitable location: preferably a flat, smooth wall. Thanks to the wall support that accompanies your digital code, you will be able to carry out a quick and practical installation. Remember to carefully follow the installation steps for your digital code: these will be listed on the instructions provided with your digital code. To program PINs, you will also need to read your instructions carefully. The digital code will have a first pre-programmed code, which you can easily replace. Replacing the batteries Please note, if you notice a drop in performance of your digital code, it is probably the batteries: check that they do not show signs of rust. Consider changing your batteries approximately every two years, if possible: this will strengthen the capabilities of your digital code and avoid premature malfunction. To replace the batteries of the MARANTEC COMMAND 231 433 digital code, nothing could be simpler: Using a coin, turn the lock located under the wall support of your digital code. Turn it counterclockwise Then remove the digital code from the wall support Unscrew the lower shell of the box Take out the batteries Place the 2 new 3V batteries, respecting the polarity Test your digital code* Screw back the cover of the box your digital code *If the memory has been erased, it is because your batteries have not been correctly inserted, or they are worn out. When the memory of your digital code has been erased, the digital code is programmed with a random code and a PIN type 1-2-3-4. Take advantage of the MARANTEC COMMAND 231 433 digicode by ordering it on Allo Remotecontrol.com If you are interested in this model, you can take advantage of our offers and guarantees now. For example, for the purchase of two or more remote controls, benefit from free delivery. If you wish to extend your warranty to benefit even more from your products, this is also possible on Allo Remotecontrol. If you are still hesitant, we suggest you consult our General Terms and Conditions. You can also contact us by email or telephone.