Presentation of the CAME SELT1NDG code keypad: Is security your priority? Don’t hesitate any longer and acquire the CAME SELT1NDG code keyboard. More than 16 million possible combinations To control the opening of your gate or motorization, the CAME SELT1NDG code keypad is the one you need. By tapping the keys on it, you can open or close the device of your choice. With this code keypad, you will have the choice between 16,777,216 different combinations to enhance your security. The “password” of this keyboard can contain a maximum of 8 digits. Furthermore, its power supply is 12 V DC. Solid and efficient Tested by CAME brand engineers, the CAME SELT1NDG code keypad will seduce you with its reliability. This device is classified with an IP 54 protection index. That is to say, this code keypad is immune to dust as well as liquid splashes in all directions. In addition, its RAL 7024 gray cover gives it superior strength. In addition, this code keypad is functional even if the temperatures of the environment around you are very high. Thus, from -20°C to 55°C, your CAME SELT1NDG code keypad will be able to operate. Can be used at night Do you want to use this device at night? This is possible thanks to its 12 backlit keys. Therefore, you will be able to use this code keypad even in the dark thanks to a pleasant blue light which will appear once you have pushed a key on the device. An added advantage for this CAME SELT1NDG code keyboard which offers you certain comfort. An elegant code keyboard The almost cubic dimensions of this code keyboard (73.5 mm high compared to 70.5 mm) and its black support make this CAME SELT1NDG code keyboard a sober accessory, but pleasing to the eye. Operation of the CAME SELT1NDG code keyboard: To ensure proper operation of this code keyboard, it is necessary to add the S0002P control card (806SL-0370, ex-code 806SL-0230) or the R800 decoding card. Installation of the CAME SELT1NDG code keypad Caution: Installation, programming, commissioning and handling of the product must only be carried out by qualified technicians. To find out about the advanced methods and all the possible settings, we invite you to consult the instructions available for download by clicking here. How to install your CAME SELT1NDG code keypad: Drill the preformed holes on the back of the case. Provide a Ø 20 corrugated sheath for the passage of the cable. Fix the box using specific plugs and screws and provide the connection cable. Position the seal and secure the front frame. Remove the selector board cover, drill one of the two pre-drilled holes and insert a drilled gasket (supplied). Make the connection (see connections and configurations paragraph). Insert the selector into the housing and secure it using the screws. Attach the front cover to the selector. How to code your CAME SELT1NDG code keypad: A code to enter will be required during the procedure for inserting a new user from the electronic card. Here is the procedure: Enter a code (with a maximum of 8 digits) on the keyboard. Press the (#) key without letting more than 10 seconds pass between one digit and the other (otherwise, the coding operation is canceled and must be repeated). Warning #2: After 5 attempts to enter an incorrect code, you will have to wait approximately 1 minute before entering the code again. Details of the CAME SELT1NDG code keypad: By purchasing this product, you obtain: A recessed box An outdoor box A gasket A front frame A fixing screw A selector A front cover FAQ of the CAME SELT1NDG code keypad: Where to find other CAME brand products? You can find other products from the Italian brand CAME (remotes; receivers) on our site by clicking on the link here Why buy the Came CAME SELT1NDG code keyboard on Allo Remotecontrol? Free delivery for the purchase of 2 or more remote controls Same day dispatch of your order Free test batteries 1 year warranty offered (possible extension up to 2 years – see T&Cs) Telephone support (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) available 5 days a week