Presentation of PROEM CIRE5 infrared cells These infrared cells are sold in pairs: one cell is a transmitter and the other is a receiver: in this way, the transmitter cell will send the signal to the receiver cell, which will send a signal to your system. motorization. This signal will stop your engine if an obstacle is in its path. Their Vac supply will allow the synchronization and simultaneous operation of the two cells, without there being any interference between them. Thanks to PRO EM infrared cells, you will benefit from quality security for your motorization systems: particularly useful if you have young children, the infrared cells will stop your system when an object or a person located in the middle of the closing path of your motorized doors. The composition of the PROEM CIRE5 infrared cell kit includes fixing screws, dowels, and everything necessary for the installation of your PROEM CIRE5 infrared cells. Design and characteristics PROEM CIRE5 infrared cells consist of a black casing and IP55 protection: it will allow you to protect your cells from water jets and dust deposits. However, remember to install your cells under cover to avoid your system malfunctioning. The two cells are adjustable by 5°, which will allow you to orient your cells opposite each other. PROEM CIRE5 infrared cells are not bulky since their dimensions are 105 x 33 x 35mm: they are rectangular cells. Their power supply is 12 Vac or 24 Vac/Vdc, for a maximum power per contact of 24W/48Vdc or 60VA/48Vac. How to align infrared cells? When you have finalized the installation of your infrared cells, it will be necessary to properly align your cells in order to operate the light beam correctly. You will need to position them opposite each other: the cells can be rotated by 5°, which will allow you to align them more easily. When the green LED on your transmitter cell is lit at maximum intensity, this means that your infrared cells have been correctly aligned. Configuring your cells The cell synchronization system will allow you to install your cells in pairs: to do this, you will need to position the 2 receivers on the same side, and opposite the receiver. If the power supply is in Vdc, this arrangement is not recommended: we recommend this arrangement only if the power supply is in Vac. Guarantee and extended warranty thanks to Allo Remotecontrol.com PRO EM guarantees all its products for 24 months from their manufacturing date: this guarantee is a manufacturing guarantee, which will only cover defective parts. This warranty will not cover the plastic part of your infrared cells. If you wish to change your PROEM CIRE5 infrared cells due to a malfunction, we advise you to contact the manufacturer directly: if the cells malfunction after 24 months following the date of manufacture, they will no longer be insured by PRO EM. For this, Allo Remotecontrol.com offers you an additional year of warranty, and the possibility of extending your warranty up to 2 years (see T&Cs). Infrared cells on Allo Remotecontrol.com If you order PROEM CIRE5 infrared cells on our site, we will offer you an extended warranty of one year free, and an additional year at low cost. If you have any questions about the PROEM CIRE5 product, our advisors are there to answer your questions, thanks to our online service. We can also be reached by telephone. If you would like to attach a photo or receive a quote, you can contact us by email. You can also consult our range of PROEM products: from receivers to transmitters, including receiver cards and digital codes, you will find many PRO EM products on our site.