Presentation of PROEM CIR20 infrared cells The infrared cell system is made up of two infrared cells: one is a transmitter and the other a receiver. The infrared receiver cell is the one that will provide information to your motorization system in the event of an obstacle: the cells act as an anti-obstacle barrier. Thanks to these obstacle sensors, your engine will avoid damage when it comes into contact with these same obstacles: the system will be automatically stopped. PROEM CIR20 infrared cells work at a wavelength of 880nm. They operate in double relay and their continuous modulation is 1.5 KHz. PROEM CIR20 infrared cells benefit from an IP55 protective casing, which means that they are resistant to water jets and dust. Their operation will be optimal at temperatures between -10°C and 55°C. The PRO EM company designed this pair of cells with the aim of strengthening user safety and preserving the performance of its accessories. Without these cells, your engine could encounter obstacles and thus cause operating problems with its system. Cells are therefore an adequate solution to maintain the durability of your motor systems. Setting up the cells Setting up the infrared cells is an important step. If the cells are poorly arranged and poorly oriented, they will not be able to detect obstacles, and your system will not be protected. To ensure the correct arrangement of your cells, remember to observe the LEDs: the red LED remains lit as long as your cells are not correctly arranged. Consider placing your cells opposite each other. When the LED on both cells is green, it means your cells are receiving power. Installation of PROEM CIR20 infrared cells Installation of infrared cells is done in a few steps: 1st step: Start by identifying the location of the fixing holes. You can use the drilling template supplied with the cells for help 2nd step: Drill the fixing holes 3rd step: Place the dowels 4th step: Assemble the seals and the cell 5th step: Secure the cell using screws provided 6th step: Carry out the electrical connection and adjustments 7th step: Secure the cover using the screw provided This installation is available in your installation instructions. Diagrams will allow you to better locate the necessary parts and the operations to be carried out. Composition of the PROEM CIR20 infrared cell system The infrared cells are sold with a kit allowing you optimal installation. If a part is ever missing, do not hesitate to contact us by email or telephone. Your PROEM CIR20 infrared cell kit is composed of: 2 seals 1 transmitter cell (3 terminals) 1 receiver cell (8 terminals) 2 covers 4 cover fixing screws 8 cell fixing screws 8 plugs Final adjustments Once the installation completed, you can adjust the sensitivity of the infrared sensors. To do this, you will need to turn the potentiometer on the receiver. Optimum sensitivity is obtained when the voltage of 3.2 Vdc is detected between terminals T and P. When the installation is optimal, you can operate your motors in complete safety, without obstacles damaging your motorized doors. . You will quickly see that this accessory is a plus for your comfort and safety. PROEM CIR20 infrared cells available now on Allo Remotecontrol If you would like to obtain PROEM CIR20 infrared cells, you can order them now on our site. We offer you numerous guarantees and advantages, which can be consulted in our General Terms and Conditions. If you are interested in PROEM CIR20 infrared cells, we suggest you take a look at the other products in the PROEM range: from remote controls to receivers, including video door phones and digital digicodes, you will find everything you need.