Presentation of the CAME ZF1N electronic card To control your automations, trust the Italian brand CAME which allows you to acquire the CAME ZF1N electronic card. A card of capital importance These electronic cards are also called “control logic”. Their importance is paramount. In fact, they can be considered as a main component of your engine. With this component, you can, for example, control your various control accessories, but also the security of your home. You can also control the motors of your entrance gates. As you will have understood, these electronic cards are of major importance for controlling the various control accessories of your installation. Whether transmitters, receivers, code keyboards, infrared cells, flashing lamps, the control possibilities using these devices are multiple. One of the keys to your motorization By using this CAME ZF1N electronic card, you can manage several settings for your swing gate. Its opening, its closing, but also other more technical aspects. For example, such as the time required before the gate closes or the sensitivity of your device to obstacles. In addition, you can also program its total or partial opening. Be master of your gate The CAME ZF1N electronic card allows you to adapt and adjust the motor torque of your automation, powered by 230 V, as you wish. That is to say, you can adjust the speed of the gate time. waiting before your gate leaves automatically close. You also have the choice to decide when to open it. Whether fast or slow, you have control over your different swing gate settings. You can also adjust the operating time of the gear motors (from 15 s to 120 s). You can also configure the waiting time setting for the second motor for each closing operation (between 3 s and 10 s). Compatibility of the ZF1N electronic card The ZF1N electronic card must be used to operate automations for swing gates powered at 230 V from the following series: CAME ATI gates CAME FERNI openings CAME FAST gates CAME KRONO openings Installation of the ZF1N electronic card Warning: The installation of this device must be carried out by professional installers or by competent persons Before proceeding with the installation, it is absolutely necessary to: Check that the fixing point of the panel is in an area protected against shocks; that the surfaces are solid and that the fixing is carried out by means of suitable elements (screws, dowels, etc.) to the surface. Provide a specific omnipolar disconnection device, with a space of more than 3 mm between contacts, for disconnecting the power supply. Ensure that any connections inside the box (made for the continuity of the protection circuit) are provided with additional insulation. This in relation to the other internal conductive parts. Finally, provide adequate pipes and conduits for the passage of electrical cables in order to protect them against mechanical deterioration. Also, the total power of the connected gear motor must not exceed 320 W. For more information on the installation of this system, we invite you to consult the PDF instructions for the product on the Allo Remotecontrol website by clicking here FAQ ZF1N electronic card Where can I find other CAME brand products? You can find other CAME brand products on Allo Remote control by clicking on the link here Why buy on Allo Remote control? – Free delivery for the purchase of 2 remote controls or more – Dispatch of your order the same day – Free 1-year warranty (possible extension up to 2 years – see T&Cs) – Telephone assistance (08 99 25 30 57) or by email available 5 days a week – In the event that the customer notices a defect in the product, he has 15 days from the date of purchase to return it to Allo Remotecontrol.