Presentation of the CAME ZA3P An electronic card, what is it? The electronic cards, type CAME ZA3P, also sometimes called “control logic” can be considered as the brain of your engine. Thanks to this, you can control the motors, control and security accessories in your home. These electronic cards are useful for controlling several control accessories for your installation. It can manage transmitters, receivers, code keypads, infrared cells, flashing lamps. You will have understood, its use is multiple. An electronic card for several settings With the CAME ZA3P electronic card, you can manage several aspects of your swing gate. Its opening, its closing, but also other more technical aspects. For example, such as the time required before the gate closes or the sensitivity of your device to obstacles. In addition, you can also program its total or partial opening. Controls your motorization The CAME ZA3P electronic card allows you to adjust the motor torque of your automation, powered by 230 V, as you wish. Just like adjusting the slowing speed of your gate leaves. Whether it opens quickly or slowly, you have control over your different swing gate settings. In addition, with this CAME ZA3P electronic card you will be able to manage the stops in your environment at the end of the stroke. Then, this card allows you to control the obstacle detection function by stopping your gate if the situation requires it. Compatibility of the CAME 3199ZA3P This ZA3P electronic card has been produced for the activation of automations for swing gates of the CAME brand, powered by 230 V. The following models are those with which it is possible to use this electronic card: The CAME ATI gates CAME FERNI devices CAME KRONO models CAME FAST opening system FROG gates Note: The CAME 3199ZA3P electronic card can replace the old CAME ZA3 and CAME ZA3N card. Programming the CAME ZA3P Warning: This device must be set up by professionals or competent people. Before working on the control cabinet, turn off the power and disconnect any batteries. For more information and details on the installation of this control card, we invite you to consult the PDF instructions on our site by clicking here. Before installing the automation, you must: Firstly, check that the fixing point of the electrical cabinet is in an area protected against shocks. Then, that the fixing surfaces are solid and that the fixing is carried out by means of appropriate elements (screws, dowels, etc.) to the surface. Afterwards, provide on the power supply network, in accordance with the installation rules, a specific omnipolar disconnection device for total isolation in the event of category III overvoltage (i.e. with a space of more than 3 mm between contacts). Ensure that any connections inside the box (made for the continuity of the protection circuit) are provided with additional insulation compared to the other internal conductive parts. Provide pipes and conduits for the passage of electrical cables in order to protect them against mechanical deterioration. CAME ZA3P FAQ Where can I find other CAME brand products? You can find other CAME brand products on Allo Remote control by clicking on the link here Why buy on Allo Remote control? – Free delivery for the purchase of 2 remote controls or more – Dispatch of your order the same day – Free 1-year warranty (possible extension up to 2 years – see T&Cs) – Telephone assistance (08 99 25 30 57) or by email available 5 days a week – In the event that the customer notices a defect in the product, he has 15 days from the date of purchase to return it to Allo Remotecontrol.