Introducing the CREASOL MULTI-3 Versatility is key. CREASOL puts this sentence into practice with the garage door, gate and barrier remote control that is the CREASOL MULTI-3 remote control. It is, due to its versatility, equipped with multiple frequencies. Here they are: 433.92 MHz the frequency of 868.3 MHz 315 MHz 288 MHz the frequency of 300 MHz 303 MHz 306 MHz the frequency of 310 MHz 318 MHz 330 MHz the frequency of 390 MHz 403.55 MHz 418 MHz The frequencies noted in italics cannot be used in the European Union. Four channels for four uses This remote control has four buttons which allow you to clone up to four different remote controls, as long as they have a frequency among them located at the top. In addition to this real quality of offering various channels, the ergonomics of this CREASOL MULTI-3 is ideal. So, this transmitter has an LED that is able to flash to tell you that the battery is low or also if the temperature in which your product is located is insufficient. The manual suggests the operating temperature is -10°C to 55°C. Please note: this transmitter has a CR2032 V type battery. In case you are not sure of the information, keep the bag and the document present when purchasing your product. This summarizes in six languages the different ways to program your remote control. So that you have this remote control with you everywhere, a ring, ideal for a key ring, allows you to attach your remote control to different devices. Its weight of 38 grams and its dimensions of 60 mm in length, 31.5 mm in width and 13.5 mm in thickness are also a solid argument for practicality. Its design and appearance make the discretion of this transmitter certain. Programming the CREASOL MULTI-3 How to duplicate your original transmitter with this remote control? (in six steps) First, press buttons 1 and 2 until the LED turns green. Then release the buttons. Then, on your new remote, press a button to copy the function that is already present on your original remote. Finally, press and hold the button on your original remote, within 10cm of the new remote. When the duplication ends, the LED flashes 2 times in the case where it is a fixed code, in the case of a rolling code, the LED flashes 4 times. Then the LED turns green. To ensure duplication is successful, press each button at least twice to make sure everything is in order. To find out more about programming and the specific characteristics of this remote control, you can read its manual in digital version. It is available here. CREASOL MULTI-3 FAQ Why buy this product on Allo Remote Control? First, your order is shipped the same day Then the 1-year warranty is offered (possible extension up to 2 years – see T&Cs) Finally, telephone assistance (08 99 25 30 57) or by email (assistance@alloremotecontrol.com) is available 5 days a week