Presentation of the CARDIN GLB248M motor The CARDIN GLB248M motor allows you to motorize your overhead doors as you wish. Powerful, it is powered by 230 V (AC), it has an absorbed power of 100 W. It has an integrated electronic card and a radio receiver, the frequency of which is 868 MHz. A powerful and secure device Powered by 230 V, the CARDIN GLB248M promises you great performance. However, the safety of this material has not been forgotten. On numerous occasions, the Italian brand’s engineers have put this device through a battery of tests in order to optimize its resistance. This is how it could be classified with the IP 54 protection index. This figure indicates that the CARDIN GLB248M is protected against dust. Also, it is secure against liquid splashes. In addition, it is functional under a temperature of -20°C up to 55°C. Thanks to these resistance capacities, you will have in your possession a device which will allow you not to be dependent on your environment. Use of the CARDIN GLB248M motor The CARDIN GLB248M motor can be used for up-and-over doors with the following dimensions: Over 4 m wide and up to 2.7 m high For up-and-over doors with service door (when installed in assembly lateral) Installation of the CARDIN GLB248M Engine Warning: The installation of this product should only be carried out by professionals. For more details on the installation of the CARDIN GLB248M motor, you can consult the user manual for this product on Allo Remotecontrol by clicking here How to successfully install the central assembly of your motor (in four steps): First, choose the diagram assembly according to the type of up-and-over door and proceed according to the instructions in points 1, 2, 3 and 7 of the previous assembly instructions. In this case there are two engine mounts to mount. One at the right end, the other at the left end of the door, respecting the distance of 65 mm from the counterweight housing, as indicated in the manual. Then, insert the toothed bush of the telescopic arm directly into the toothed shaft of the gear motor. After pushing it all the way, secure it using the grub screw provided. Then check the balancing of the apron by manually operating the tilting door. This will turn out to be unbalanced because of the weight of the gear motors. Therefore, it will be necessary to increase each counterweight by approximately 10 kg. Finally, correct the counterweights until the overhead door is perfectly balanced and aligned. This regardless of its position. CARDIN GLB248M Engine FAQ Can you tell me more about the CARDIN brand? To begin with, in the world of home automation, the Italian brand CARDIN has made its way since the year of its creation in 1974. In the DNA of this brand, there is a real desire to offer you simple, ergonomic systems. and reliable for automation and access control. This by making a relevant choice in the materials selected for each of their products. Finally, striving for excellence for them is part of normality. Moreover, many of their products, whether remote controls, receivers or batteries, are used every day around the world by various consumers. Where can I find other CARDIN brand products? You can find other CARDIN brand products on Allo Remote Control by clicking on the link here Why buy this product on Allo Remote Control? First, know that your satisfaction is the priority. We will handle your product with great care. Then, your order is shipped the same day Then the 1-year warranty is offered (possible extension up to 2 years – see T&Cs) Finally, telephone assistance (08 99 25 30 57) or by email (assistance @alloremotecontrol.com) is available 5 days a week