Presentation of the CAME ZR24N control cabinet Since 1970, the CAME brand has been one of the leaders in home automation. Whether remote controls, code keypads or receivers, the Italian brand is recognized worldwide for its quality products. Thanks to the CAME ZR24N control cabinet, you will be master of controlling the CAME H series roller shutter gear motors. Ideal for adjusting your roller shutters. With the CAME ZR24N control cabinet, you will be able to manage, program and configure as you wish. your CAME motors as you wish. Powered by 230 V, this control cabinet has integrated radio decoding. This control cabinet makes it possible, for example, to adjust the operating time of the gearmotors. Their operating times can be set between 10 and 120 seconds. In addition, thanks to this device you can adjust the waiting time for the blind in the open position. This means that a few seconds after opening your CAME H series roller shutters, a closing operation can be carried out automatically. The wait time can be set between 1 and 120 seconds. Supplied with a protected box This control cabinet has a box categorized with protection index IP54. This means that this sound box is protected against dust, but also against liquid splashes in all directions. Additionally, don’t be afraid to use this device even if temperatures are expected to be extreme. In fact, this CAME ZR24N control cabinet can withstand cold temperatures down to -20°C. In addition, this is also viable even if the temperature is likely to rise. Tests carried out by CAME engineers revealed that the CAME ZR24N is capable of being used if temperatures are equal to 55°C. So, no longer be dependent on your environment! Installation of the CAME ZR24N control cabinet Caution: The installation of the control cabinet must be done with extreme caution. Only professionals or competent persons should install this equipment. For more information on the installation of this control cabinet, we invite you to consult the PDF instructions for this product on Allo Remote Control by clicking here How to fix this control cabinet? Secure the cabinet base in a protected area using specific screws and anchors. Drill the pre-drilled holes under the cabinet base (be careful not to damage the electronic board inside the cabinet). Drill the predrilled holes and insert the cable ducts with corrugated pipes for the passage of electrical cables. To put the cover on: After making the electrical connections and putting it into operation, put the cover on and secure it using the screws provided. Registering a user on the control cabinet: Note: It is possible to register up to 50 users; beyond this number, the PRG indicator flashes quickly and the user is not memorized. Hold down the PROG key on the electronic board. The light flashes. Press one of the buttons on the transmitter to memorize. The indicator light stays on to signal that memorization has actually been executed. Use of the CAME ZR24N control cabinet The CAME ZR24N control cabinet has been designed for: controlling CAME roller shutter gearmotors for residential and commercial use in the H series. FAQ of the CAME ZR24N control cabinet Where can Can I find other CAME brand products? You can find other CAME brand products on Allo Remote control by clicking on the link here Why buy on Allo Remote control? – First, free delivery for the purchase of 2 remote controls or more – Then, your order is shipped the same day – 1 year warranty offered (possible extension up to 2 years – see T&Cs) – Assistance telephone (08 99 25 30 57) or by email available 5 days a week – Finally, in the event that the customer notices a defect in the product, he has 15 days from his purchase to return it to Allo Remotecontrol.