Presentation of the CAME TOPD4 RES

To control your automation quickly and without issues, take advantage of the CAME TOPD4 RES. With its green color and the help of its 4 buttons, you can configure up to 4 different channels!

The advantage of dual frequency

For this product, you won’t have to worry about choosing its frequency. Indeed, this CAME TOPD4 RES is dual frequency. This means you can operate your automation at 433 MHz and 868 MHz, without programming constraints.

Another benefit for you by choosing the CAME TOPD4 RES. It is programmable via self-learning. Thus, you can pair your transmitter with its corresponding receiver without the presence of a professional.

A remote control with enhanced security

Security is a must for the Italian manufacturer CAME. For this model, the engineers have designed it with rolling-code, also known as a rotating code. Thanks to this type of coding, you won’t have to worry about potential duplication of your product.

How is this possible? Well, when you activate the command of your choice for your receiver, the transmitter’s code changes according to an algorithm stored in the transmitter. The result is that the receiver will activate if the rotating code transmitted by the transmitter matches the algorithm it has in memory.

An ergonomic remote control

The white buttons, very visible, that make up this remote control allow you to operate your chosen command without issues. Moreover, the green color that accompanies this device gives a pleasant appearance to this fob whose qualities are well established.

Compatibility of the CAME TOPD4 RES

The Came TOPD4 RES is compatible with remote controls from the TOPD range and with the letter R, using rolling-code, including these (non-exhaustive list):

• The transmitter CAME TOPD2RGS
• The remote control CAME TOPD2RKS
• The CAME TOPD2RPS
• The CAME TOPD4RBS
• The fob CAME TOPD4RGS
• The transmitter CAME TOPD4RKS
• The remote control CAME TOPD4RPS

Attention: This transmitter is not compatible with TOPD transmitters with the letter F that follows, as these are fixed code remote controls.

Programming the CAME TOPD4 RES

For more information on setting up your remote control, please click on the product PDF manual by clicking here

How to program your Came TOPD4 RES remote control:

1. First, take both remote controls and get close to your receiver (max 5m).
2. Then, press the already programmed button on your old remote for 10 seconds until the LED is steady.
3. Next, you have 20 seconds to register the button of your choice on your new remote. You can register multiple remotes at once.
4. Congratulations! Your new remote is programmed!

To change the frequency of your remote control:

Hold down the two largest buttons.
The LED of the transmitter will first blink slowly.
After about 5 seconds, it will blink faster.
Then after another 5 seconds, it will turn off, or blink slowly again, or stay steadily on.
You can release the buttons.

If the LED has turned off, then the transmitter buttons are now at 868MHz.
If it has started blinking slowly, then the transmitter buttons are in dual frequency 433.92 and 868.35 MHz.
Finally, if the LED has turned on steadily, then the transmitter buttons are now at 433.92 MHz.

FAQ for the CAME TOPD4 RES

Where can I buy other products from the CAME brand?

You can buy other products from the CAME brand by clicking on the link here.

Why buy your product on Alloremotecontrol?

– First, know that your satisfaction is our priority. We will handle your product with great care.

– Then, your order is shipped the same day.

– Next, a 1-year warranty is offered (extension possible up to 2 years – see T&Cs).

– Phone assistance (08 99 25 30 57) or email support is available 5 days a week.

– If the customer notices a defect in the product, they have 15 days from the date of purchase to return it to Alloremotecontrol.