Presentation of the CAME TOPD2 RPS – 806TS-0115

With nearly 50 years of experience, the Italian brand CAME is a reference in the world of home automation and automation systems. With the CAME TOPD2 RPS – 806TS-0115, you have in your possession one of the latest products from the CAME brand.

Enjoy this transmitter immediately

With its dual frequency, the CAME TOPD2 RPS – 806TS-0115 allows you to control your automation systems, whether they are at 433 MHz and 868 MHz. Thus, with this transmitter, you avoid the hassle of wondering if the frequency of your motorization matches that of your remote control.

But its qualities don’t stop there. With this remote control, you can operate up to two different channels, whether it’s your gate or your garage door. Moreover, it is programmable via self-learning. This means that this remote control can be easily paired with your receiver. In this way, you can use this device just a few minutes after unpacking it. And this without the help of a professional!

A guarantee of safety

Its performance is also coupled with formidable security. The CAME TOPD2 RPS – 806TS-0115 is coded in rolling code, also known as code tournant in French. With this system, you will have greater security than that of a classic transmitter. How is this possible? Well, the code sent to your receiver – from this transmitter – varies with each new pulse following an algorithm stored in the transmitter during its programming. For your receiver to activate, the rolling code transmitted by the transmitter must be in phase with the algorithm it has in memory. Thanks to this, you no longer need to worry about a pirate intrusion; duplicating this beep will indeed be very complicated.

Compatibility of the CAME TOPD2 RPS – 806TS-0115

The CAME TOPD2 RPS – 806TS-0115 is compatible with remote controls from the TOPD range and with the letter R, using rolling code, including the following (non-exhaustive list):

• The CAME TOPD2 RGS transmitter
• The CAME TOPD2 RKS remote control
• The CAME TOPD4 RBS
• The CAME TOPD4 RGS beep
• The CAME TOPD4 RKS transmitter

Attention: This transmitter is not compatible with TOPD transmitters with the letter F that follows, as these are fixed code remote controls.

Programming the CAME TOPD2 RPS – 806TS-0115

For more information on setting up your remote control, please click on the product PDF manual by clicking here

To change the frequency of your remote control:

Hold down both buttons.
The LED of the transmitter will first blink slowly.
After about 5 seconds, it will blink more quickly.
Then after another 5 seconds, it will turn off, or blink slowly again, or stay on steadily.
You can release the buttons.

If the LED has turned off, then the transmitter buttons are now at 868MHz.
If it has started blinking slowly, then the transmitter buttons are in dual frequency 433.92 and 868.35 MHz.
Finally, if the LED has lit steadily, then the transmitter buttons are now at 433.92 MHz.

FAQ FOR THE CAME TOPD2 RPS – 806TS-0115

Where can I buy other products from the CAME brand?

You can buy other products from the CAME brand by clicking on the link here.

Why buy your product on Alloremotecontrol?

– First, know that your satisfaction is our priority. We will handle your product with great care.

– Then, your order is shipped the same day.

– Next, a 1-year warranty is offered (possible extension up to 2 years – see T&Cs).

– Telephone assistance (08 99 25 30 57) or email is available 5 days a week.

– If the customer notices a defect in the product, they have 15 days from the date of purchase to return it to Alloremotecontrol.