Presentation of the CAME VER PLUS VER10MDS kit The Italian brand CAME founded in 1970 is renowned in the world of home automation for its products combining power and ease of use. It offers you a CAME VER PLUS VER10MDS automation kit for your garage door from the VER range with a maximum surface area of 18 m2. A suitable automation In this CAME VER PLUS VER10MDS kit, you have a CAME VER10DMS automation for sectional and tilting garage doors for residential and industrial use included. It has a pulling force of 1000N and a 24V power supply. Its adaptation is assured, because this system is designed to accommodate a large number of modern garage doors. Its weight is 5.7 kg. The maximum limits of use of this device are as follows: 2.4 m in height for counterweighted tilting doors 3.25 m in height for spring-loaded tilting doors 3.20 m in height for sectional doors A remote control combining power and ergonomics Inside this kit, a CAME TOPD4RBS transmitter is added. Powerful, it has a dual frequency of 433.92MHz and 868.35MHz. That is to say that you will be able to control gate and garage motors of these two frequencies, if they are of the same brand as this one. With its 4 keys, you can also control up to four different channels. You will have understood, this beep offers you a triptych composed of simplicity, versatility and performance. A radio card for your home In addition, with the CAME VER PLUS VER10MDS, you will have at your disposal a CAME AF43S receiver. Functional with the frequency of 433.920 MHz and powered by 12 V/24 V (AC/DC), it has two channels and its design precision no longer needs to be proven. Contents of the CAME VER PLUS VER10MDS kit Among the products in this kit, you have the following objects: A CAME VER10DMS automation with control cabinet and encoder for counterweight and spring-loaded overhead doors and for sectional doors A CAME TOPD4RBS transmitter An electronic card CAME AF43S A gate plate Complete programming instructions Installation of the CAME VER PLUS VER10MDS kit Installation of the CAME VER10DMS To provide you with assistance, we invite you to consult the user manual for this product available on Allo Remote Control by clicking here Programming the CAME TOPD4RBS How to program your remote using an old remote (in four steps): First, take your old and new remotes. Move closer to your receiver (within a maximum distance of 5 m) Then, press the already programmed button on your old remote control for 10 seconds. Its LED should become fixed. Then, you then have 20 seconds to register the button of your choice on your new remote control by maintaining pressure on it. You can register multiple remote controls at once. Congratulations ! Your new remote control is programmed! For more information on programming your remote control, we invite you to consult the PDF product instructions on our site by clicking here Installation of the CAME AF43S radio card For more information on programming your receiver, we invite you consult the product programming instructions on our site by clicking here How to program my remote control to my receiver: First, open the radio receiver (you have to follow the antenna wire to locate it). Then press the push button on the receiver. The latter is identifiable, because it says MEMO; REC; ENR; PROG on the radio board (for some receivers, simply press the MEMO button once and release it. For others, you have to hold the MEMO button). Then, a light on the radio board lights up or flashes. Then, press the button on your remote control for a second and then release it. Then wait for the light on the radio board to go out. Finally, test the remote control and close your radio receiver. CAME VER PLUS VER10MDS 24V kit FAQ Where can I find other CAME brand products? You can find other CAME brand products on Allo Remote Control by clicking on the link here