Presentation of the PROEM AMCR4 external radio antenna The PROEM AMCR4 radio antenna is an antenna with a frequency of 433.92MHz PM and designed for PRO EM range receivers operating at this frequency. Thanks to it, you will be able to increase and improve the sensitivity of the radio reception of your receiver. This improvement in sensitivity will allow you a more efficient action distance with your remote control. It will allow you to considerably improve the radio reception between your transmitter and your receiver: the action distance will thus be greater. This antenna must be tuned and connected to your receiver: you can attach the antenna using the stainless steel wall bracket. The 3.5m long cable gives you a very long range. Thanks to its stainless steel wall bracket, you can attach it to all your walls. However, be careful not to place it close to another antenna or any source of interference, such as a laptop. This antenna can easily be installed outdoors thanks to its stainless cable, but make sure that it remains sheltered from rain, frost and sun. If you want to ensure the proper functioning of your radio antenna, we also advise you to fix it at a height, so that it can provide a better range for your automations. This antenna operates at a frequency of 433 MHz and will be compatible with all PRO EM brand receivers and motors operating on the same frequency. An improvement in the security of your automations Thanks to this radio antenna, you will allow your automatic gates, garage doors or shutters to be even more secure than before. This will prove useful in the event of obstacles around your motor system (a tree, rocks, etc.). These same obstacles could significantly reduce the range of your remote control and/or damage your system. The radio antenna will also allow you to reduce the risk of signal drop, which would be caused by too great a distance. The antenna will be able to prevent these signal drops and thus reinforce the security of your automations. This accessory is ideal for strengthening communication between your receiver and transmitter. If you have difficulty controlling your automations from your car, you will no longer have this problem by installing the PROEM AMCR4 radio antenna. In fact, it may happen that radio communication is disrupted, and your motor system is not the cause. By purchasing a radio antenna, you will be able to correct these disturbances linked to radio transmission. It will allow you to control your motor systems from an even greater distance. It will also be able to receive your transmitters more easily. It will be particularly useful if you live in a place where radio connections are severely disrupted. Compatibility of the PROEM AMCR4 radio antenna If you have receivers and transmitters operating at the frequency of 433 MHz, the PROEM AMCR4 radio antenna will be compatible with them. For example, this antenna can be installed if you are equipped with the PROEM RR2C4ACS radio receiver. It will strengthen the radio signal from a compatible remote control, such as the Proem ER2C4ACS and Proem ER4C4ACS remote controls. Order your PROEM AMCR4 radio antenna now on Allo Remotecontrol.com If you wish to order your antenna on Allo Remotecontrol.com, we will provide you with the installation instructions with your antenna. You can benefit from free delivery by ordering the two compatible remote controls on the air: compatible test batteries will be provided with your remote controls. The warranty on your product may be extended for up to 2 additional years. To see more clearly, we advise you to take a look at our general conditions of sale. If you have the slightest doubt, do not hesitate to contact our advisors by telephone, or send us an email. Our advisors will respond to you as soon as possible.