Presentation of the ALLMATIC FOR 4 remote control This remote control can be used to replace the ALLMATIC BRO2WN and BRO4WN remote controls. It was designed by the ALLMATIC brand, an Italian company developing and manufacturing products and accessories for automation and security systems. This remote control model is equipped with the best technologies that will allow you to combine safety and ease of use. Firstly, the ALLMATIC FOR 4 remote control is equipped with the Rolling code system, which promises you foolproof security and reliability. Rolling code is a rolling code system that produces a unique, unclonable code each time you press your remote control. Thanks to it, you will no longer be able to fear theft and hacking of your motor systems. Secondly, this remote control can be programmed easily and above all quickly thanks to self-learning, a programming system based on the recording of your previous remote controls in the receiver. Once your remote controls are registered, you will be able to copy and transfer the code and memory of your remote control to a new one. Technical characteristics of the ALLMATIC FOR 4 remote control This remote control is produced by ALLMATIC brand and will operate at a frequency of 433.92 Mhz. It will be able to control your automations from more than 120 meters away. It will require 12V LR23A type batteries. These batteries will be available in many stores and will be easy to place in the case of your remote control. It is neither too large nor too small (40 x 63 x 10mm) and will allow you to hold it well in your hand thanks to optimal grip. If you are afraid of losing it, know that you can attach your key ring to it, using the eyelet located on the bottom of your ALLMATIC FOR4 remote control. Programming the ALLMATIC FOR 4 remote control You will have two programming possibilities, which you will be free to choose at your convenience. To program your ALLMATIC FOR 4 remote control using your old remote control, simply follow the following instructions: 1st step: Place yourself near your radio receiver (1 or 2 meters max) 2nd step: Press the small hole located at the back of your remote control (you can use accessories, such as a paper clip, for example) or, press the hidden button located near the battery 3rd step: The light on your remote control should light up for 1 second then turn off automatically: this tells you that your receiver is entering “programming” mode. You have 10 seconds left to register your ALLMATIC FOR 4 remote control: you will need to press the button you want to connect to the control of your receiver. If you exceed the allotted time, the receiver will return to normal. If you want to program several remote controls, it is possible: you will just have to repeat this operation with each remote control. 4th step: Your ALLMATIC FOR 4 remote control is programmed and ready to use You can just as easily program your remote control from your receiver: 1st step: Open the receiver. Then press the “P1” or “MEMO” push button located on the radio card. If you hold the P1 button for too long, you will erase all registered remote controls 2nd step: The red or green LED should light up: this is the sign that your receiver has entered “programming” mode. You have 10 seconds left to register your ALLMATIC FOR 4 remote control: you will need to press the button you want to connect to the control of your receiver. If you exceed the allotted time, the receiver will return to normal. 3rd step: Your ALLMATIC FOR 4 remote control is programmed and ready to use Please note: if you wish to order the ALLMATIC FOR 4 remote control with an additional remote control, your delivery will be free.