COVID-19: We continue all our deliveries, however due to the actual context there might be a slight delay.
Menu
-11.1%
TELCOMA EDGE 4


47.90

Fast delivery !

Product in stockOrder processed on Monday 29 December 2025

Batteries* and instructions included
* Batteries included for gate and garage remote controls.

Technical service at your service

14 days to change your mind

Secure payment

Fast delivery

Customer support

Satisfied or your money back

Description

Use the TELCOMA brand and never be embarrassed again! For your entrance gate or garage, the remote control TELCOMA EDGE 4 is the one you need. Thanks to its frequency of 433.92 MHz, you will have a great range and can configure up to 4 different channels!

Presentation of the TELCOMA EDGE 4 Remote Control

For your entrance gate or garage, the remote control TELCOMA EDGE 4 is the one you need. Its use is simple, just like its installation, which will only take you a few minutes.

An Ideal Signal Range

This remote control TELCOMA EDGE 4 operates at a frequency of 433.92 MHz. An ideal frequency for optimal signal range. Thus, you will only need to be a few centimeters away from your motorization to operate your automation. You can then use your remote inside your home. An added advantage, to provide you with more comfort. Moreover, programming this transmitter is very easy, as it is self-learning coded. This way, you won’t need a specialist’s help to program this remote.

Superior Security Level

Furthermore, the security level of this remote control TELCOMA EDGE 4 is superior to others thanks to its rolling code. This means that the code sent to the receiver varies with each new press of the open or close button on your remote, following an algorithm generated by the remote. Don’t worry about the duplication of your system!

4 Commands with 1 Transmitter

Additionally, with this automation, you can configure up to four different channels. With a single button press, you can activate the closing, partial opening (if possible), or full opening of your door or entrance gate. This makes things easier with just one transmitter.

Reliable in All Weather

The remote control TELCOMA EDGE 4 is highly reliable, regardless of weather conditions. With CR2016 batteries powering it, this remote is usable over time, even with daily use. Moreover, even if temperatures are cool, down to -20°C, for example, you can use this transmitter. No more worries about potential heat waves. The TELCOMA EDGE 4 can withstand temperatures up to 55°C.

Minimal Weight for Maximum Use

With dimensions of 75 mm in height, 11 mm in thickness, and 36 mm in width, you can carry this remote wherever you want. In a predefined storage space, or in a handbag, or even a pocket, the 20 grams that this remote weighs will not bother you. Additionally, its modern appearance, with its blue buttons, gives this transmitter a natural elegance.

Compatibility of the TELCOMA EDGE 4 Remote Control

Note: The TELCOMA EDGE remotes with blue and black buttons are not compatible with each other.

The remote control TELCOMA EDGE 4 is compatible with the following remotes:

  • The remote TELCOMA SLIM4
  • The transmitter TELCOMA TANGO 4
  • The remote TELCOMA TANGO 4N

Installation of the TELCOMA EDGE 4 Remote Control

Your remote control TELCOMA EDGE 4 benefits from self-learning programming. The programming steps have been simplified to allow for even easier and faster programming.

How to Program Your Remote Directly on Your Receiver (in Seven Steps)

  1. First, open the casing of your receiver (it must be compatible with your remote control TELCOMA EDGE 4). Your receiver should be located near your motorization.
  2. Next, on the board of your receiver, press the programming button P1, located at the top left of your board, until the diode of the receiver blinks rapidly.
  3. Then, press any button on your remote control TELCOMA EDGE 4 (the button you will press is the one that will control your automation).
  4. Next, hold this button down until the diode of your receiver stops blinking and becomes steady.
  5. Wait about 5 seconds until the diode of your receiver starts blinking again. You can now release the button.
  6. Finally, wait about 10 seconds.
  7. Congratulations! Your remote is programmed and ready to use.

For more information on programming your remote, you can consult the product PDF manual by clicking here

FAQ for the TELCOMA EDGE 4 Remote Control

Where to Find Other Products from the TELCOMA Brand?

You can find other products from the TELCOMA brand on Alloremotecontrol by clicking here

Why Buy This Product on Alloremotecontrol?

  • First, know that your satisfaction is our priority. We will handle your product with great care.
  • Next, your order will be shipped the same day.
  • Then, a 1-year warranty is offered (extension possible up to 2 years – see T&Cs)
  • Finally, phone assistance (08 99 25 30 57) or email support ([email protected]) available 5 days a week

Additional information

BRAND

TELCOMA

REFERENCE

EDGE_4

HEIGHT

75

DEPTH

11

WIDTH

36

NUMBER OF BUTTONS

4

BUTTONS COLOUR

BLUE

CASE COLOUR

BLACK

FREQUENCY

433.92

SWITCH

0

BATTERY/POWER

CR2016

PROGRAMMING TYPE

SELF LEARNING

Back to top