Note: Remote controls for BERNER, LIMUS, and ECOSTAR motors. The LIMUS receiver accepts a maximum of 6 remote controls, just like the ECOSTAR receiver.

The ECOSTAR RSE 2 remote control is a device that will allow you to operate your motors and automation with ease. The coding of this gray box is done through self-learning, which offers you considerable time savings during its programming.

The ECOSTAR RSE 2 with 2 channels is practical and will simplify the operation of your automation. Thanks to its ergonomics, design, and practicality, it has won over many users: it will allow you to manage all your automation with ease.

Design, color, and dimensions of ECOSTAR RSE 2

The ECOSTAR RSE 2 remote control is available only in gray. It features 2 oval buttons, particularly ergonomic: for the visually impaired, the buttons are engraved in braille. Additionally, thanks to its dimensions, this remote control will be an ally in your daily life: lightweight, small, and discreet, you can take it anywhere with you, slipping it into your pockets, bags, or placing it in your glove compartment.

Technical specifications of the ECOSTAR RSE 2 remote control

• The ECOSTAR RSE 2 model is powered by a CR2025 battery: this battery will provide you with great autonomy
• It is equipped with the Rolling Code system
• It has a range of up to 100 meters: you no longer need to get as close as possible to your gate or garage door to control them
• The ECOSTAR RSE 2 remote control operates at a frequency of 433.92 MHz
• Its dimensions are 62mm x 28mm x 15mm (length x width x thickness)

Compatibility

The ECOSTAR RSE 2 remote control is ideally compatible with the ECOSTAR RET2 receiver. This box can replace your following ECOSTAR gate remotes:

• TUBAUTO RSC2
• HÖRMANN RSM4-433 Mhz
• HÖRMANN RS4-433 Mhz

The ECOSTAR RSE 2 transmitter is compatible with the following ECOSTAR remote controls:

• Ecostar RSC2
• Ecostar RSE4
• Hörmann RS2-433
• Hörmann RS4-433
• Hömann RSM4-433
• Hörmann RSN2-433

(All ECOSTAR and HORMANN models not listed among the compatible remotes will not be compatible with the programming of the ECOSTAR RSE 2 transmitter. Be sure to check the compatibilities of your old model before your purchase.)

Programming the remote control

Programming is done through self-learning, and you will only need to make a few adjustments to program your ECOSTAR RSE 2 remote control to your receiver. This programming does not require any specific equipment: the steps are available in the programming manual, which will be delivered with your remote control. However, we have listed the programming steps in case the manual is lost:

• 1^st step: Start by pressing the transparent button located under your ECOSTAR motor. You can release the button when the receiver’s LED starts to blink slowly
• 2^nd step: Within 10 seconds of the previous step, press one of the two buttons on your remote control. You can release the button when the motor’s LED blinks rapidly
• 3^rd step: Repeat the 2^nd step: release the button only when the LED blinks very rapidly
• Your remote control is programmed and ready for use

(Your ECOSTAR receiver cannot receive the signal from more than 6 remote controls. Therefore, the programming of remote controls on your system cannot exceed 6 remote controls per receiver.)

Why buy this model from Alloremotecontrol?

• Free shipping for the purchase of 2 remote controls or more
• Your order will be shipped the same day
• Test batteries are free
• A 1-year warranty is offered (with a possible extension of an additional year – see T&Cs)
• The manual is available (in PDF and video)
• Our phone or email support is available for you 5 days a week

Make your purchase with peace of mind thanks to the one-year warranty offered by Alloremotecontrol to its customers on all its products. Even better, why not opt for a second year of additional warranty when finalizing your order? (See T&Cs)