Presentation of the REMOCON RMC 168 433 SL Remote Control

This remote control is not just a simple gate remote: it is a universal remote, which means it can copy the codes from any of your remotes, provided they operate on the same frequency of 433.92 Mhz.

The REMOCON RMC 168 433 SL remote is capable of operating all your automation systems, regardless of their brand. With it, you can easily control all the automation in your home from a distance: garage doors, gates, lighting systems, or alarms, etc.

It is a 4-channel model: you can control up to 4 automation systems with a single remote. This way, managing your automation will be simpler, more fun, and practical, as you can consolidate the control of all your automation into one remote.

The REMOCON RMC 168 433 SL remote is very comfortable: it will greatly enhance your quality of life. Indeed, you will no longer need to get close to your receiver to open and close your automation, as it can control it from a distance. With just one press of a button, your motorization will open and close as you wish.

Ergonomic Design of the REMOCON RMC 168 433 SL Remote

This remote is ultra-functional, but in addition to that, it is very practical and features a very interesting design and ergonomics. The REMOCON RMC 168 433 SL remote is equipped with a sliding cover that allows you to close it if you want to place it in a pocket or bag, without interfering with its buttons.

Indeed, it often happens that when you store a remote in your bag, the buttons are not protected. This is where the cover comes in: it acts as a protector for your buttons. Thus, you won’t risk accidentally opening your gate or garage door.

Moreover, its black color gives it a sleek and elegant style, which will accompany you on all your travels. The advantage of the REMOCON RMC 168 433 SL remote is that it is equipped with a loop, allowing you to hang it anywhere: on your keychain, on your bag, or even on a pair of jeans.

The Replacement for the REMOCON 610 A Remote

The REMOCON RMC 168 433 SL remote replaces the old model REMOCON 610 A: since it has become obsolete, it is better to replace it with the REMOCON RMC 168 433 SL. It has the same features and can be copied easily and quickly.

The REMOCON RMC 168 433 SL is Programmed by Self-Learning

For its programming, it will not require any additional equipment and will be done very quickly using any remote, as long as it operates on a similar frequency to the REMOCON RMC 168 433 SL. The programming mode is self-learning, allowing for efficient programming in less than 5 minutes.

Programming the REMOCON RMC 168 433 SL Remote

To correctly program your REMOCON RMC 168 433 SL remote, please follow the instructions below (these instructions are also available in the product manual of your remote):

• 1^st step: Get your old remote model that is still in service
• 2^nd step: Place your two remotes 2 cm apart from each other
• 3^rd step: Press all 3 buttons on the REMOCON RMC 168 433 SL remote simultaneously: stop only when the LED blinks 4 times
• 4^th step: Release 2 of the 3 buttons while keeping the one you want to program pressed
• 5^th step: While holding down the button, take your old remote and press the button you want to copy until the LED blinks 3 times
• 6^th step: You can now release all buttons: your REMOCON RMC 168 433 SL remote is programmed and ready for use

If you wish to order this remote on Alloremotecontrol.com, please note that your order will be shipped within 24 hours of your purchase.